Overview
The KSJ MG26-F2 smart Gloss Meter is a gloss measurement instrument designed and manufactured with reference to the international standard ISO2813 and the Chinese national standard GB/T9754. The technical parameters meet the requirements of ASTM D523, GB/T13891, GB7706, GB8807 standards, and the performance indicators meet the requirements of the first-level working machine in the national JJG 696-2002 Measurement verification regulations. Traceability of Gloss can be obtained from the Glossiness national benchmark of Shanghai Institute of Measurement and Testing Technology.
Features
1. Multi-angle one-click measurement
2. Optional angle mode
3. Power-on self-diagnosis, self-school
4. Practical and rich display interface: display each current Measured value, average value, group number and measurement number at the same time
5. Pre-grouped measurement data, each measurement packet can contain up to 99 measurements
6. Measurement unit defaults to Gloss unit (GU), can also be switched to percentage reflectance (%)
7. The measurement data of the packet can be browsed by specifying the packet number
8. Immediate deletion of invalid measurements
9. Comes with USB adapter and Gloss data processing software
10. With low power prompt, space full prompt function
11. With haze value calculation and percentage reflectance unit conversion function
Principle
The Gloss Meter determines Glossiness by measuring the reflection ability of the surface of the material to light. Using multi-angle measurement technology, it can complete 20 °/60 ° double-angle measurement with one button. The measurement data is calculated and displayed in real time through the internal processing system.
Applications
Paints Coatings, Decoration Materials, Building Materials, Plastic Materials, Bamboo and Wood Products, Ceramic Products, Leather Products, Film Paper, Printing inks, Auto Care, Molding Moulds
Standards
ISO2813、GB/T9754、ASTM D523、GB/T13891、GB7706、GB8807、JJG 696-2002
Steps
1. Power-on self-diagnosis, self-school
2. Select Measurement Angles Mode
3. Align the measurement port with the measured surface
4. One-click measurement
5. View the display interface data
6. Browse measurement data by grouping serial number
7. Invalid measurements can be deleted immediately
Notice
• Operating temperature range is 10~ 40 ℃
• Storage Temperature range -10 ℃~ 60 ℃
• relative humidity should be < 85% and no condensation
• Use one AA (or LR6) alkaline dry battery or rechargeable battery
• Make sure the instrument is self-calibrated before measurement
• Timely processing of low power prompts
• Pay attention to the space full prompt and clean the data in time
