Overview
Japan OSP stainless steel brush K-16 is a wire brush specially designed for cleaning laboratory bars and production machines. The bristle length is 16mm, the bristle part is 35mm wide and 100mm long, with 6 rows of bristles, and the base is made of 13mm thick wood material.
Features
1. Adopt 0.06mm ultra-fine steel wire diameter, which is thinner than the common 0.07mm on the market, and the cleaning effect is more effective
2. The bristles are super soft and clean without damaging the roller surface
3. Originating in Japan, each piece is handmade by experienced craftsmen
Principle
Through the ultra-fine soft wire bristles and the cleaning liquid, the surface of the anilox roller is brushed in a circular motion, which effectively clears the blocked inks without damaging the surface of the instrument.
Applications
Laboratory bar cleaning, production machine anilox roller cleaning
Steps
1. Rinse Mayer Rods surface inks with water after shutdown
2. Spreader cleaning solution evenly on the surface of the anilox roller, wait for 10 minutes, then brush with wire brush in circular motion for 3-5 minutes, and let the foam stay for 3-5 minutes after brushing
3. Rinse the cleaning solution thoroughly with water
4. For severe blockage, the cleaning liquid residence time and brushing time can be extended, or the above steps can be repeability
Notice
• Be sure to rinse thoroughly with water after cleaning to avoid cleaning liquid residue
In case of severe blockage, the cleaning time and repeability cleaning steps can be appropriately extended
• Pay attention to brushing in circular motion when using
