Overview
YP6001B Electronic Balance is a LICHEN brand YP-B rechargeable series product, which adopts an intelligent Balance composed of a high-Stability Sensor and a single-chip microcomputer. This model is easy to carry, easy to operate, and has functions such as de-tare weight, self-calibration, counting, and fault display. It is suitable for a variety of environments. It is one of the Balances configured in the factory assembly line.
Features
1. High-definition LCD screen, the display is clear and clear
2. Large size stainless steel pan, easy to weigh
3. Automatic fault detection, overload protection
4. Grams, ounces, carats and other multi-unit conversion and counting functions
5. Automatic external weight calibrating
6. Full scale peeling
7. Built-in rechargeable battery
8. With RS232 interface (optional), it can be connected to computers, printers and other equipment
Principle
The YP6001B Electronic Balance uses an intelligent system composed of a high-Stability Sensor and a single-chip microcomputer to work. The Sensor converts the mass signal of the weighed object into an electrical signal, which is processed and calculated by the single-chip microcomputer, and finally displays the result clearly through the LCD liquid crystal display.
Applications
Factory assembly line
Standards
Precision level III
Steps
1. Balance on a smooth countertop.
2. Power on (AC220V/50Hz or use built-in battery).
3. Turn it on and warm up, and use it after stabilization.
4. Automatic calibration with external weight if calibrated.
5. Place the item to be weighed on the pan.
6. Read the stable value on the display.
7. Can use peeling, unit conversion, counting and other functions.
8. Shut down after use.
Notice
• Please place the Balance on a stable, vibration-free countertop for use.
• Avoid use in environments with strong airflow or severe electromagnetic interference.
• Pay attention to the weighing range of Balance (0.1-600 g), do not overload.
• Keep the pan clean and avoid direct contact with corrosive substances.
• When not in use for a long time, it is recommended to charge the built-in battery regularly.
When weighing accurately, make sure the environment is stable and wait for the displayed value to be stable (1-2 seconds) before reading.
• Standard external weights are required for calibrating.
When connecting external devices (e.g. computers, printers), it is necessary to confirm that the RS232 interface has been selected and connected correctly.
