Overview
LICHEN DHS-16A Moisture Analyzer is an electronic halogen moisture rapid measuring instrument using the principle of halogen lamp pyrolysis weight. While measuring the weight of the sample, the instrument rapidly dries the sample through the halogen lamp heating unit and water evaporation channel, and continuously measures and displays the percentage of water loss immediately. After the drying procedure is completed, the final Moisture content value is locked. Compared with the international oven heating method, its heating is fast, the results are consistent, and the detection efficiency is higher. Generally, the sample can be measured in a few minutes. The operation is simple and the test is accurate. It can display data such as moisture value, drying value, measurement time, and temperature value. It also has the function of connecting with computers and printers.
Features
1. The dual-drive ultra-quiet opening of the fully automatic heating cabin door prevents the impact of artificial flip-off on weighing and meets the requirements of automatic testing.
2.5 inch high definition intelligent touch display, Linear dispersion real-time dynamic analysis, direct display moisture percentage, dry weight percentage, dry weight weight.
3.180 ° C limit heating temperature, meeting the vast majority of sample tests.
4. Store 9 sets of recent test records, retrieve and print test results at any time.
5. It can meet the maximum weighing capacity of 110g.
6. Adopt Mouth Weighing Sensor.
7. Adopt stainless steel to heat the inner compartment to improve the efficiency of sample testing.
Principle
The Moisture Analyzer uses the halogen lamp pyrolysis weight principle. The instrument starts the halogen lamp heating unit to rapidly heat and dry the sample while measuring the initial weight of the sample, so that the water in the sample evaporates. During the drying process, the instrument continuously measures the weight of the sample lost due to water evaporation, and instantly calculates and displays the percentage of Moisture content lost. When the drying procedure is completed (the set conditions are reached), the instrument locks and displays the final measured Moisture content value.
Applications
The information does not mention specific Applications.
Standards
The data did not mention specific compliance criteria.
Steps
The information does not provide specific operation steps.
Notice
The information did not provide specific precautions.
