Overview
HUITAI MJ-150FN mildew incubator is a thermostatic equipment specially used for environment protection, agriculture, livestock, aquatic and other scientific research, institutions and production departments. It is suitable for water analysis and BOD determination, fostering and preservation of bacteria, molds and microorganisms, and plant cultivation and breeding experiments.
Features
1. Humanized design: large-screen LCD display, multiple sets of data are displayed on one screen, and the menu-type operation interface is simple and easy to understand; mirror stainless steel liner, four-corner and half-arc design is easy to clean, shelf spacing is adjustable; use 134a without fluorine refrigerant, energy saving and environmental protection; There are 25mm test holes on the left side of the box, which is convenient for experimental operation; the fan wind speed is adjusted by speed and slow gear to prevent the loss of water from the sample; the instrument control of the whole machine is placed in the upper left corner of the door panel, which is beautiful and generous and saves space; the double door structure is easy to observe; the sand blasting treatment on the surface of the
2. Quality assurance: brand Compressor and self-developed cooling system are used to prolong the service life; JAKEL tube flow circulating fan and unique air duct structure ensure temperature uniformity; PID control mode has accurate temperature control and small fluctuations, with timing function up to 99 hours and 59 minutes.
3. UV sterilization system: located on the top layer of the box, effectively killing floating bacteria and preventing pollution.
4. Intelligent LCD programmable multi-stage controller (optional): 15 30-step programs can be preset, and each setting time is 1 to 99 hours and 59 minutes to achieve automatic control.
5. Independent temperature limit alarm system (optional): automatic interruption and sound and light alarm to ensure safety.
6. Convenient data processing (optional): USB or RS485 interface can be connected to a printer or computer to record temperature changes.
Principle
Mildew incubator precisely adjusts the temperature in the box through PID control mode, uses brand Compressor and self-developed cooling system to achieve cooling, uses JAKEL tube flow circulating fan and unique air duct structure to establish an air circulation system to ensure temperature uniformity. UV sterilization system kills floating bacteria in the circulating air and prevents pollution. Optional multi-stage programming controller for automatic operation.
Applications
Environment protection, agriculture and livestock, aquatic products, scientific research, colleges and universities, production departments, water analysis, BOD determination, bacterial foster, mold foster, microbial foster, preservation, plant cultivation, breeding test
Steps
1. Connect the power supply and turn on the power switch of the device.
2. Set temperature, time and other parameters through the large-screen LCD display interface.
3. For programming, use the optional smart controller to preset multi-segment programs.
4. Place the sample on the adjustable shelf and close the double door.
5. Start the device and monitor the running status.
6. After the experiment, turn off the power and clean the liner.
Notice
• Power frequency of AC 220V 50Hz before use to avoid overload.
• When setting the wind speed of the fan, select the fast and slow gear according to the needs of the sample to prevent moisture loss.
• Regularly clean the mirror stainless steel liner and box surface to maintain hygiene.
• Pay attention to safety during operation and avoid touching high-temperature or charged parts.
• Optional functions such as temperature limit alarm system need to be set correctly to ensure experimental safety.
• When not in use for a long time, disconnect the power supply and store it properly.
