Overview
BENTING CBJX-150B incubator is specially designed for environmental protection, agriculture and livestock, drug inspection, aquatic and other scientific research institutions and production departments. It is suitable for water analysis, BOD determination, and the fostering and preservation of bacteria, molds and microorganisms.
Features
1. Mirror stainless steel studio, four-corner semi-circular arc transition, easy to clean, adjustable pallet spacing
2. Microcomputer control system, accurate and reliable temperature control, large-screen LCD multi-data display, light touch operation button, equipped with UV sterilization lamp
3. Independent humidification, sterilization, temperature limit alarm system, over-temperature alarm and automatic interrupt function
4. There is a φ 52mm test hole on the left side of the box, which is convenient for temperature measurement and external power connection
5.Double-decked sealing door structure, inner door tempered Glass with silicone strip, outer door magnetic strip, easy to open and close and good sealing
6. Brand Compressor, fluorine-free refrigeration
7. Ultrasonic humidifier, intelligent atomization of water particles, good humidification effect, manual humidity control
Principle
The incubator precisely adjusts the temperature and humidity through a microcomputer control system, and uses fluorine-free refrigeration and ultrasonic humidification technology to ensure a stable indoor environment. The independent alarm system automatically interrupts the operation when the temperature exceeds to ensure safety.
Applications
Environmental protection, agriculture and livestock, drug inspection, aquatic products, scientific research institutions, production departments
Steps
1. Connect the power supply and ensure that the voltage is 220V/50Hz.
2. Set the required temperature and humidity parameters through the microcomputer control system
3. Adjust the pallet spacing as needed
4. Start the device and monitor the temperature and humidity display
5. Use test holes for external measurement or connection
6. Timing function can be set to 1-9999 minutes range
7. Turn off the device after the operation is completed
Notice
* Ambient Temperature should be maintained at 5-30 ℃, humidity should not exceed 50% RH
* Avoid use in over-temperature conditions to prevent automatic interruption
* Pay attention to the stainless steel surface and sealing structure when cleaning the studio
* Manual humidity control requires regular inspection of humidity deviation
Follow safety regulations when using UV germicidal lamps
* Pay attention to the weight of the equipment when handling, net weight 68.5kg, gross weight 98kg
