Overview
The HZLB LGZ-800-LED light chamber is a plant fostering device with a top LED Illuminant. It precisely controls the temperature and Illumrination degree through a microcomputer program, which can simulate day and night temperature changes or provide a stable light environment. It is suitable for plant growth experiments and research that require precise environment control.
Features
1. Microcomputer program control, LCD liquid crystal display, can simulate day and night temperature changes.
2. 30 stages of the program can be set, each lasting 1-99 hours, to meet the needs of different stages of plant growth.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term stable operation and low energy consumption.
4. With anti-fog observation window and door lock, liner is mirror stainless steel, four corners arc transition, Shelf can be freely loaded and unloaded, easy to clean.
5. Using overhead LED cold Illuminant, beam of light does not produce heat, extracting light waves that are beneficial to plants, Illuminant board size 420 * 480mm, Color temperature 4000K.
6. LED Illuminant has the characteristics of miniaturization, planarization and strong designability, which can realize the free arrangement of point formation and multi-color light.
7. LED energy consumption is extremely low, about 80% lower than ordinary Illuminant, combined with foam insulation technology, energy saving and low cost of use, the whole machine free warranty period is extended to two years.
8. Provide accurate and stable lighting, with a service life of more than 50,000 hours and high photoelectric conversion efficiency.
9. LED Response Time is nanosecond, integrated point array Illuminant to ensure uniform coverage.
10. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a dual-use box.
11. Top-mounted planar illumination ensures uniform absorption of Illuminants by the foster and maintains the conformity of experimental results.
12. Horizontal circulating air design to ensure uniform temperature across layers.
13. Illuminant height adjustable shelf according to crop growth.
14. Equipped with an independent temperature limit alarm system (optional), which automatically interrupts when the temperature exceeds the limit to ensure safety.
15. Parameter changes can be recorded, data can be downloaded through a U disk, and an optional RS485 interface can be connected to computer monitoring (optional).
16. Can be equipped with CO2 air inlet and imported infrared CO2 controller (optional).
17. Each layer can be equipped with LED Illuminants of different Colors (optional).
Principle
The device is programmed and precisely controlled by a microcomputer Control system. The Compressor and cooling system are responsible for regulating the temperature, and the horizontal circulating air ensures that the temperature inside the box is uniform. The overhead LED Illuminant array provides specific light spectrum and intensity to simulate the light environment required for plant growth. Users can set multi-stage programs to automatically cycle the temperature and light to simulate natural conditions or create specific experimental environments.
Applications
Plant growth research, seed germination experiment, tissue fostering, microbial fostering, environment simulation experiment
Standards
The data did not mention specific compliance criteria
Steps
1. Place the equipment in a stable, ventilated, non-corrosion gas environment.
Connect the power supply (220V 50Hz).
3. Set the required temperature, Illumrination degree and program parameters through the microcomputer control panel.
4. Place the foster on the adjustable shelf and adjust the Illuminant height as needed.
5. Start the device and run the setting program.
6. The internal situation can be viewed through the observation window, and the data can be downloaded from the U disk or monitored through the optional computer interface during operation.
7. After the experiment, turn off the power and clean the box.
Notice
• Equipment should be used in a non-corrosion gas environment with Ambient Temperature 0~ 30 ° C and Humidity < 85%.
• Power supply voltage is 220V 50Hz.
• The Compressor is in Intermittent Operating Mode, which is a normal phenomenon.
• When cleaning the liner, pay attention to loading and unloading the Shelf bracket to avoid scratching the mirror stainless steel.
• If the temperature limit alarm system is selected, ensure that its function is normal.
• If it is not used for a long time, the power supply should be disconnected.
• Optional functions (such as CO2 Control, Specific Color Illuminants, Computer Connections, etc.) should be operated according to the corresponding instructions.
