Overview
The HZLB SPX-260A biochemistry cultivating box is a 260L program-controlled foster device with a large-screen LCD display for precise control and easy operation. Its liner is made of stainless steel with a Temperature range of 0-65 ° C, which is suitable for fostering microorganisms, cell tissues and other samples.
Features
1. Large-screen LCD program control, one-screen display of multiple sets of data, simple operation, accurate control, with blue backlight.
2. Intuitively display the operation process, set temperature, temperature in the box, remaining time of the operation period, Ambient Temperature and protection temperature.
3. It can be set to automatically convert 1-99 time periods, with a time range of 1-999 hours for each time period.
4. The liner protection temperature can be set, and the software and hardware will automatically cut off the heating power supply when it exceeds the temperature to protect the sample.
5. With Ultra Temperature Sensor Abnormal Protection Function to Ensure Instrument and Sample Safety.
6. Optional with full Light spectrum plant growth lamp (disinfection mold lamp).
7. Full liner stainless steel material.
8. With power-down memory and power-down time automatic compensation function, the original working state can be continued after power failure.
9. Sensor (Ambient Temperature, Protection Temperature, Cabinet Temperature) fault identification function.
10. Optional ultra-high temperature and ultra-low temperature remote APP early warning and alarm function.
11. Optional climate box internal data network extraction function, transfer data to the network through GPRS, support computer view, download, print and analyze data Linear dispersion.
12. Optional mobile app to view data Linear dispersion and set the upper and lower limit alarm function.
Principle
The biochemistry cultivating box sets temperature and time parameters through the program controller to drive the heating system to work, so that the temperature in the box reaches and maintains the set value. The Compressor works intermittently to maintain a low temperature environment. The system monitors the temperature in the box in real time, Ambient Temperature and protection temperature, and precisely controls it through Sensor feedback, with automatic protection and fault identification functions.
Applications
Microbial foster, cell tissue foster, seed germination experiment, plant growth research, water quality analysis, drug Stability test
Steps
1. Turn on the power supply (220V +/- 22V, 50Hz +/- 0.5Hz).
2. Set the required temperature program through the large-screen LCD control panel (1-99 time periods can be set, each time period is 1-999 hours).
3. Set the liner protection temperature.
4. Put in the sample to be fostered and close the box door.
5. Start the device and start running. The running status and parameters can be monitored in real time through the screen.
6. After the run, remove the sample.
7. If network or APP functions are selected, you can remotely view data and receive alarms through a computer or mobile phone.
Notice
* Power supply voltage is 220V +/- 22V and Frequency is in the range of 50Hz +/- 0.5Hz.
* Equipment should be placed in a smooth, well-ventilated environment.
* Set liner protection temperature to prevent sample overheating.
* Pay attention to observe the operating status of the equipment. If there is an over-temperature or abnormal Sensor alarm, please deal with it in time.
Optional remote warning, data network extraction and APP functions require additional configuration.
* The Compressor is in Intermittent Operating Mode, which is a normal phenomenon.
Regularly clean and maintain equipment, especially observation windows and liners.
* The fault identification function helps to analyze and troubleshoot problems, please refer to the relevant tips.
