Overview
The LANDTEK TM8812 Series Precision Ultrasonic Thickness Gauge is a practical split precision Ultrasonic Thickness Gauge, including the TM8812 and TM8812C models. It uses high-performance, low-power microprocessor technology with a resolution of 0.1mm/0.01mm and a Measurement range of 1.2 to 200mm. The instrument can be used for thickness measurement of various pipes and Pressure Vessels in production equipment, as well as for accurate measurement of various plates and machined parts.
Features
1. Adopt high-performance, low-power microprocessor technology
2. Automatically memorize material codes and sound velocity values
3. With coupling status prompt function
4. Automatic shutdown and manual shutdown functions
5. Use RS-232C data line output and PC for data collection, processing, analysis and printing
6. Optional Bluetooth Bluetooth data output
7. With Strong Transmitting Power and High Broadband Receiving Sensitivity, Can Adapt to Different Frequency Probes, Can Measure Severe Corrosion Rough Surface, Lacquer Surface and Some Gray Cast Iron
8. Numbers are displayed, ignoring the difference
Principle
The Ultrasonic Thickness Gauge is based on the principle of ultrasonic propagation, transmits and receives ultrasonic signals through Probe, and calculates material thickness using microprocessor technology. It can adapt to different Frequency Probes for accurate measurement of various material surfaces.
Applications
Thickness measurement and corrosion measurement of boiler storage tanks, pipes, pipes, plates, forgings, flanges, hulls, decks, tracks, machined parts, etc. in petrochemical industry, shipbuilding, automobile manufacturing, power station, and machine manufacturing
Steps
1. Install the battery and turn it on
2. Select the Probe Connection
3. Apply coupling agent to the measurement surface
4. Fit the Probe to the Tested Surface
5. Read the thickness value on the display
6. Data can be output via RS-232C or Bluetooth
7. Manual shutdown or wait for automatic shutdown after use
Notice
* Ambient Temperature 0~ 40 ℃
* Operating Relative Humidity should be less than 85% RH
* Make sure the battery is fully charged before use, and pay attention to the low voltage prompt
* Probe should be well coupled with the measured surface during measurement
* Different materials need to set the corresponding Speed of sound value
* High temperature measurement requires high temperature Sensor
* Special Sensor for small diameter measurement
Avoid strong impact or vibration of the instrument
