Overview
RDS 33 #L2000φ 10 wire-wound Applicator rod is a wire-wound Metering rod produced by RDS Company in the United States. RDS company has more than 80 years of experience in R & D and production of Spreader Metering rod, and its products are widely used around the world. This model Metering rod adopts stainless steel mandrel chrome plating process, with a total length of 2000mm and an effective application width of 1900mm, which is suitable for Spreader operation of various substrates.
Features
1. RDS, a professional manufacturer of Spreader Metering rods with over 80 years of history.
2. Adopting the classic "Mayer" wire winding rod design, the technology is mature and widely used.
3. The wet film thickness is 83.8μm, the diameter of the steel wire is φ 0.84mm, and the specifications are clear.
4. The mandrel is made of stainless steel 303 and has a chrome-plated surface for good durability.
5. Total length 2000mm, effective application width of 1900mm, suitable for wide Spreader.
6. Wire winding rod design allows for disbonding and re-winding, which helps to save costs and reduce waste.
Principle
The RDS wire-wound Applicator rod works based on the classic Mayer rod coating principle. Its surface is wrapped with a stainless steel wire of a specific diameter. When the coating is applied to the substrate and passes through the Metering rod, the gap formed between the wire and the mandrel determines the amount of excess coating that is scraped off, resulting in precise control of the wet film thickness left on the substrate. The chrome-plated surface helps reduce friction and makes the Spreader process smoother and more uniform.
Applications
Coating, window film, adhesive tape, release paper, photovoltaic film, wall covering material, special paper
Standards
No specific compliance criteria were mentioned in the data.
Steps
The specific operation steps are not provided in the data.
Notice
The information does not mention specific precautions.
