Overview
The LS192 is a Handheld glossmeter with a 60 ° universal angle design and a range of up to 1000GU. It is widely used for surface Glossiness testing of paints, coatings, inks, plastics, paper, tiles, ceramics, Stone, metals and platings. The instrument is easy to operate, and it can be measured immediately without pressing buttons. In addition to normal mode, it can also be set to QC mode, which can realize QC fast detection. The instrument is also equipped with powerful PC software, which can Connectivity measurement, intelligently count data and generate measurement reports.
Features
1. The operation is simple, it can be used immediately after starting the machine, the instrument can be measured immediately, and the data can be locked with one click, without cumbersome settings.
2. The instrument can be switched to normal mode or QC mode to adapt to different application scenarios. Normal mode can be released and measured immediately, and fast reading; QC mode can customize the upper and lower limits and judge whether the data is qualified or not, which can realize fast detection of incoming materials.
3. The instrument has Ambient Temperature Compensation function, numerical stability, allowing long-period calibrating. Repeatability is very good, 0-100GU Measurement range, Repeatability up to +/- 0.2GU; 100-1000GU Measurement range Repeatability up to +/- 0.2% reading.
4. The LS192 glossmeter can ensure that it passes any Measurement Institute test and meets the national JJG696-2002 first-class working machine standard, which is fully comparable to the imported glossmeter test data.
5. Equipped with dedicated host computer software (only supports Windows systems), supports PC-side settings, Connectivity measurement, and can print test reports with test results.
6. Strong magnetic suction bottom cover design, two-in-one with the standard plate, can be calibrated when turned on, no need to worry about Calibration plate loss.
7. Built-in high-performance rechargeable lithium battery, the instrument has ultra-low power consumption, and can last for more than 48 hours on a single charge.
8. The fuselage is thin, compact and portable, with an aviation aluminum shell, industrial style design, and excellent texture.
Principle
No specific Working Principle statement is mentioned in the product information.
Applications
Paints, Coatings, inks, Plastics, Paper, Tiles, Ceramics, Stones, Metals, Platings
Standards
ISO2813, ISO7668, ASTM D523, ASTM D2457, DIN 67530, GB/T9754, GB/T13891, GB/T7706, GB/T8807, JJG 696-2002 first-class working machine requirements
Steps
1. It can be used when turned on, the instrument can be measured immediately, and the data can be locked with one click.
2. Connectivity measurement, parameter setting, report generation and printing can be carried out by connecting the computer via USB, using the included U disk or PC software downloaded online (only supports Windows system).
Notice
The recommended verification period is one year, and the company provides adjustment services.
• When the battery of the instrument is empty, it should be charged in time.
• If the instrument is not used for more than half a year, it needs to be charged regularly to prevent the battery from being damaged by excessive discharge.
• If there are multiple instruments, you need to put the instruments into the base corresponding to the serial number to calibrate.
• The instrument has temperature compensation, allowing long-term calibration. It is recommended to calibrate once a week. If the Ambient Temperature changes significantly, it must be re-calibrated.
• The instrument test port should be fitted to the surface of the tested object to avoid external light leakage.
• After the base is removed from the main unit, it should be stored in a clean place to avoid staining the standard board.
• Do not insert any object into the instrument to clean it, as this will damage the instrument and affect the Measurement accuracy and operation safety.
• Instruments and standard boards should be cleaned before storage and use, and contaminants should be removed with a clean special lens cloth. The surface of the standard board is very precise to ensure that the lens cloth does not have any fine particles, otherwise it will damage the standard board.
