Overview
DR5000S Coating thickness gauge is an instrument that adopts the principle of electromagnetic induction and conforms to GB/T4956-2003 standard, which can quickly, non-destructive and precise measurement of magnetic metal surface nonmagnetic coating Film thickness. It can nondestructive measurement of paints, Electrophoresis, enamel, rubber, powder, enamel, anti-corrosion layer, galvanized, chromium and other nonmagnetic coating Film thickness on magnetic metal substrates such as steel, iron, nickel, etc. The instrument adopts an integrated metal probe design, and the test is stable and firm.
Features
1. Adopt Alloy Integrated Probe
2. Simple Operation, Fast Test Speed and High Sensitivity
3. Exquisite artificial integration design, easy to carry
4. Imported 32-bit High Accuracy Processing Chip and high-speed data processing technology, temperature compensation technology
5. Two test methods: continuous test and single measurement
6. Statistical functions: MAX Maximum, MIN Minimum, Average
7. 2000 measurement data can be stored, divided into 10 groups of data, and the saved data can be viewed
8. Can be connected to a computer for communication and read out the stored data for saving or printing
9. Two calibrating methods: zero point calibrating and two point calibrating
10. There is a beep prompt during the operation
11. Automatic identification of ferrous and non-ferrous substrates
12. Low voltage indication
13. Manual/automatic shutdown function
14. Large LCD backlight display, with screen swirl/spin inversion function
15. Metric conversion function um/mil
Principle
DR5000S Coating thickness gauge adopts the principle of electromagnetic induction to accurately measure the coating thickness by measuring the change of magnetic Induction between magnetic metal substrate and nonmagnetic coating. The instrument uses magnetic Induction method to realize nondestructive detection of coating thickness.
Applications
Automotive paints, automotive evaluation, manufacturing, metal processing, chemical, commodity inspection
Steps
1. Select the test method: continuous test or single measurement
2. Calibrate: You can choose zero point calibrate or two point calibrate
3. Place the probe on the surface to be measured for measurement
4. View the measurement results, the instrument provides statistical functions
5. Save measurement data to memory
6. Optional connection to computer to read data
Notice
• Need to calibrate before measurement
• Pay attention to the battery level, and prompt when the voltage is low.
• operation temperature range is 0 ℃ -50 ℃
• relative humidity range of 20~ 90% RH
• Minimum measurement surface is 18 * 15mm
• Minimum radius of curvature: convex 5mm, concave 25mm
• The thinnest substrate is 0.4mm.
• Powered by three AA alkaline batteries
