Overview
DR9000S anticorrosive layer thickness gauge is a professional nondestructive testing instrument based on the principle of electromagnetic induction, which conforms to GB/T 4956-1985 and GB/T 4956-2003 national standards for the measurement of magnetic metal surface nonmagnetic coating Film thickness. The instrument can nondestructive detect paints, Electrophoresis, galvanized, rubber and other coatings on steel, iron and other substrates. It has the characteristics of simple operation, convenient carrying, large screen display and durable measuring head.
Features
1. Large range: 0-9500μm (0-9.5 mm)
2. Simple operation, fast test speed, Sensitivity, high measurement accuracy
3. Adopt alloy Probe, wear-resistant and pressure-resistant, sturdy and durable
4. With continuous measurement and single measurement two measurement methods
5. With MAX Maximum, MIN Minimum, average, measurement times four statistical functions
6. Mass storage, capable of storing 2000 pieces of data in 10 groups
7. Three calibrating methods: zero point calibrating, two point calibrating, multi point calibrating
8. Upper and lower limit alarm function (can be set in single measurement mode)
9. The operation process is marked by a beep (in single measurement mode)
10. Automatic identification of ferrous and non-ferrous substrates
11. Metric conversion μm/Mil
12. Sunshine mode (used under strong light)
13. Chinese and English bilingual version
14.2.3 inch large color screen large font display
15. Manual/automatic shutdown function
16. Bluetooth synchronous data transmission function (customized)
Principle
DR9000S anticorrosive layer thickness gauge uses the principle of electromagnetic induction to determine the film thickness of the coating by measuring the change of magnetic Induction between the magnetic metal substrate and the nonmagnetic coating, and realizes nondestructive detection.
Applications
Paints, Electrophoresis, Powder, Galvanized, Chromium, Copper, Enamel, Rubber, Enamel, Anticorrosive layer, Paint and other nonmagnetic film thickness measurement
Standards
GB/T 4956-1985、GB/T 4956-2003
Steps
1. Select the measurement method (continuous measurement or single measurement)
2. Calibrate as needed (zero point calibrate, two point calibrate or multi point calibrate)
3. Place the Probe on the surface to be tested
4. Read Film thickness values on the display
5. Use the statistics function to view MAX Maximum, MIN Minimum, Average and other data
6. Optional storage of measurement data
7. Manual or automatic shutdown after use
Notice
It should be used in a non-magnetic environment
• operation temperature range is 0 ℃ -60 ℃
• operation humidity range 20% RH-90% RH
• Minimum measurement surface is φ 20.5mm
• Minimum radius of curvature: convex 5mm, concave 25mm
• The thinnest substrate is 0.4mm.
• Powered by three (7) alkaline batteries
