Overview
GDJS-100D high and low temperature alternating damping heat test chamber is suitable for aerospace products, information electronic Instruments, materials, electrical, electronic products and various electronic components in high and low temperature or heat and humidity environment inspection of its performance indicators test equipment.
Features
1. The box is processed by numerical control machine tool, which is beautiful and easy to operate
2. The inner tank of the box is made of imported stainless steel (SUS304) mirror plate, and the shell is sprayed with A3 steel plate
3. Large observation window with lighting, using heating element embedded tempered Glass
4. The humidification system piping is separated from the control circuit board to improve safety
5. The pipeline circuit system of the water system adopts door opening, which is convenient for maintenance and repair
6. The temperature and humidity control instrument adopts a 7.0-inch large screen screen, and the operation interface is optional in Chinese and English
7. With 100 sets of programs and 1000 segments of 999 cycle steps capacity
8. Adopt the original French "Taikang" fully enclosed Compressor refrigeration system
9. Multi-wing blower with strong air circulation, uniform temperature and humidity distribution
Principle
Through the coordination of the refrigeration system, the heating system and the humidification system, the equipment creates a precise and controllable high and low temperature and heating and humidity environment in the closed box. The multi-wing blower is used to achieve strong air circulation to ensure the uniform distribution of temperature and humidity in the test area, and the temperature and humidity change process is precisely controlled by the programmable controller.
Applications
Aerospace Products, Information Electronic Instruments, Materials, Electrical, Electronic Products, Various Electronic Components
Standards
GB/T10592－2008、GB/T10586－2006、GB/T2423.1－2008、GB/T2423.2－2008、GB/T2423.3－2006、GB/T2423.4－2008、GJB150.3A-2009、GJB150.4A-2009
Steps
1. Connect the power supply and check the device status
2. Set test program and parameters through 7.0 inch Touchscreen
3. Place the test sample on the test rack
4. Close the door and start the test program
5. Monitor the test process through the observation window
6. Remove the sample after the test is completed
Notice
Operating Environment Temperature should be within 5 ℃~ 30 ℃
• Operating Environment Humidity ≤ 85% R.H
• Pay attention to check the water level of the replenishment tank to avoid water shortage operation
• Make sure the door sealing strip is intact before testing
• Regular maintenance checks on refrigeration systems and electrical systems
• Power frequency requirements: AC220V +/- 10% 50Hz or AC380V +/- 10% 50Hz three-phase five-wire system
