Overview
Pottery and porcelain fiber muffle furnace with SX2-4-10TP integrated Pottery and porcelain fiber furnace and multi-sided heating element, with fast heating speed, energy saving, high efficiency characteristics, can improve the experimental environment, energy saving rate of 40%, tested to reach the C grade furnace standard.
Features
1. Pottery and porcelain fiber furnace and multi-sided heating, uniform temperature distribution
2. Fast heating speed, significant energy saving, energy saving rate of 40%
3. LCD program control instrument, high luminance and wide window digital display
4.30-Stage programming setting, suitable for complex experimental processes
5. Microcomputer intelligent control, accurate and stable temperature control
6. Perfect safety protection measures: fault sound and light alarm, over-temperature sound and light alarm, automatic cutting off heating output, opening the door to stop heating
7. Built-in secondary over-temperature protection device, double insurance
Principle
The muffle furnace through the PID control system, the use of K indexing nickel chromium - nickel silicon Thermocouple temperature measurement, through the high temperature resistance wire heating, to achieve full range programmable setting, automatic control of temperature and thermostatic process.
Applications
Laboratories, scientific research institutions, industrial production
Standards
Class C furnace standard
Steps
1. Set temperature parameters
2. Set the heating rate (1-30 ° C/min)
3. Set working hours
4. Start the device to run automatically
5. Automatic shutdown after thermostatic time
Notice
• Power frequency check before use (220V, 50Hz)
• Pay attention to the position where the Thermocouple enters from the top of the furnace body
• The heating wire terminal is located below the back of the furnace body
• The controller is located under the furnace body and needs to be connected correctly to the compensation wire
• If there is an alarm during operation, it should be checked and dealt with immediately
• The device will automatically stop heating when opening the door
