Overview
The BENTING CSX-4-10 resistance furnace is a laboratory heating equipment with a maximum temperature of 1000 ° C. It adopts an all-in-one lightweight and compact design. It is equipped with a closed aluminum silicate furnace and a nickel-chromium-aluminum alloy heating wire. It is combined with a PID microcomputer temperature control system to achieve precise temperature control.
Features
1. Integrated design, lightweight and compact structure
2. Closed aluminum silicate furnace, lightweight insulation brick to ensure full use of heat
3. Parallel side-opening furnace door to keep the hot end away from operation
4. PID Microcomputer Thermostat Combined with Precision Sensor for Accurate Temperature
5. Dedicated function keys to achieve temperature setting
6. Auxiliary menu to achieve over-rise alarm, deviation correction, menu lock
7. Optional exhaust device, conducive to ashing
8. Nickel-chromium-aluminum alloy heating wire is closed and embedded in the aluminum silicate furnace to reduce the corrosion of volatile gas on the heating wire
Principle
The resistance furnace generates heat through the nickel-chromium-aluminum alloy heating wire, and uses three-sided heating to heat the closed aluminum silicate furnace. The PID microcomputer temperature control system cooperates with the K-type Thermocouple Sensor to achieve accurate temperature control and stage heating.
Applications
Laboratory heating, material ashing, heat treatment
Steps
1. Use the touch of four buttons to set the temperature
2. Select fixed-value operation, regular operation or automatic stop mode
3. The equipment automatically heats up and runs according to the set parameters
4. The device automatically stops after the operation is completed
Notice
Pay attention to the use of the over-rise alarm function
● You can use the menu button lock function to prevent misoperation
● Pay attention to the installation position when selecting the exhaust device
● Power frequency requirement is AC220V/18A 50/60Hz
● Equipment weight, need to pay attention to safety when handling
