Overview
HN series digital torque tester is a general-purpose torsional torque measuring instrument, which is mainly used to detect the tightness of the workpiece and the torsional performance of some components. It is also used for the measurement and correction of various electric batches, torque batches, and torque wrench torque and torque setting conditions. The instrument adopts electronic Sensor technology, which has the advantages of high accuracy, easy operation, high Sensitivity, and reliable data. It is equipped with a special host computer operating software to connect to a computer for data storage, analysis, export, query and printing.
Features
1. High Accuracy, high resolution, high stability, sampling speed up to 100HZ
2. Special Instrument Toolbox with EVA Shockproof Encasement, Easy to Transport, Save and Carry
3. Segment LCD display, green backlight screen
4. Three units N.m, kgf.cm, lbf.in automatic conversion
5. Test direction display (counterclockwise +, clockwise -)
6. Three test modes: real-time torque value tracking mode, peak hold mode, first peak mode
7. Can set the upper and lower limit comparison value to judge whether the data is qualified or not, with sound alarm and level signal output
8. Store 99 sets of test data and automatically calculate the average value of the stored data, MAX Maximum and MIN Minimum.
9. Peak hold time can be set (can be set from 0 to 99 seconds)
10. Gravity acceleration value can be set
11. Automatic shutdown without operation can be set (time can be set freely from 0 to 99 minutes)
12. Using intelligent charging, safe charging, prolong battery life
13. Host computer software: Chinese WINDOWS interface
14. Linear dispersion of test results: real-time torque value - time, peak torque value - times, first peak - times
15. Qualification judgment: In addition to automatically obtaining test results, qualified judgment and batch testing pass rate can also be made according to the qualified range of preset standard values
16. Automatic storage: Test data and Linear dispersion are automatically stored in the computer, and the number of storage is unlimited
17. Test data: The data obtained from the test can be queried and exported in excel format
18. Test report: Test report can be prepared in the format required by the user, form a report and print it
Principle
The instrument uses electronic Sensor technology for torsional torque measurement, detects torque signals through Sensor and converts them into electrical signals, which are displayed on the LCD screen after processing, and can be connected to the host computer software for data analytics and management.
Applications
Various mass inspections, physical experiments, engineering tests
Standards
JB/T5483-2015 standard torque meter technical specification, JJG_557 -2011 standard torque meter
Steps
1. Connect the power supply or use the built-in lithium battery for power supply.
2. Set the test mode as needed (real-time torque tracking mode, peak hold mode or first peak mode)
3. Set the unit (N.m, kgf.cm or lbf.in)
4. Set the upper and lower limit comparison values for qualification judgment
5. Perform torque test operation
6. Review test results and data analytics
7. Connect to the host computer software for data storage, export, and report generation
Notice
* operation temperature range is 0~ 40 ℃, storage temperature is -20 ℃ -70 ℃
* relative humidity should be kept at 15% -80%
* The working environment should be free of vibration and corrosive media
* Charge with a dedicated charger, AC input 220V/50HZ, DC output 5V/1A
* Different instrument dimensions and weights are different, please confirm the specific parameters before use
