Overview
HN-200E digital high-speed torque tester is an intelligent multi-functional Measurement instrument designed by HBO for detecting the torque of high-speed and Impact torsion equipment. It is mainly used to detect the tightness of the workpiece and the torsional performance of the component. It can also measure and correct the torque and torque setting of various electric batches, wind batches, torque batches, and torque wrench. It has the advantages of high accuracy, easy operation, high Sensitivity, and reliable data.
Features
1. High Accuracy High resolution, high stability, sampling speed up to 1920HZ
2. Special Instrument Toolbox with EVA Shockproof Encasement, easy to transport, store and carry
3. Segment LCD display, green backlight screen
4. Three units N.m, kgf.cm, lbf.in automatic conversion
5. Test direction display (counterclockwise +, clockwise -)
6. Three test modes: real-time torque value tracking mode, peak hold mode, first peak mode
7. Can set the upper and lower limit comparison value to make data qualified judgment, with sound alarm and level signal output
8. Store 99 sets of test data, automatically calculate the average, MAX Maximum and MIN Minimum
9. Peak hold time can be set (0 to 99 seconds)
10. Gravity acceleration value can be set
11. Automatic shutdown without operation can be set (0~ 99 minutes)
12. Smart charging, safe charging and extended battery life
13. Host computer software: Chinese WINDOWS interface
14. Linear dispersion of test results: real-time torque value - time, peak torque value - times, first peak - times
15. Qualification judgment: automatically judge the qualification and batch inspection pass rate according to the preset standard value
16. Automatic storage: Test data and Linear dispersion are automatically stored to the computer, and the number of storage is unlimited
17. Test data: Query and export in excel format
18. Test report: prepared and printed according to user requirements
Principle
The instrument adopts electronic Sensor technology, which detects torque signal in real time through High Accuracy Sensor, converts it into digital signal for processing and display. It is equipped with special host computer operating software to connect to the computer to realize data storage, analysis, export, query and printing functions.
Applications
Various mass inspections, physical experiments, engineering tests
Standards
JB/T5483-2015 standard torque meter technical specification, JJG_557 -2011 standard torque meter
Steps
1. Connect the instrument to a power supply or charger
2. Turn on the instrument power switch
3. Set test mode, unit, upper and lower limits and other parameters as needed
4. Connect the tester to the equipment or workpiece under test
5. Start the test, the instrument automatically collects torque data
6. Observe the real-time data of the display screen or host computer software and Linear dispersion
7. After the test is completed, the data is automatically stored
8. Query, analyze, export data or generate reports through PC software
9. Turn off the power of the instrument and store it properly
Notice
• The working environment should be free of vibration and corrosive media
• operation temperature range is 0~ 40 ℃, storage temperature is -20 ℃~ 70 ℃
• The relative humidity should be kept at 15% to 80%
• Make sure the battery is fully charged or connected to a stable power supply before use
• Avoid operating in extreme temperature or humidity conditions
• Use special toolboxes for transportation and storage to prevent damage
Periodically calibrate instruments to ensure measurement accuracy
• Pay attention to safety during operation and avoid overload use
