Overview
BOZHEN BZ-4-10TC integrated Pottery and porcelain fiber muffle furnace adopts overall design and humanized menu design. The furnace tank adopts high temperature resistant Pottery and porcelain fiber vacuum forming, mechatronics design, LCD digital display. Its energy saving rate reaches 40%, and it has reached the national C-class furnace standard after testing. After setting the temperature, the instrument controls the heating output by itself, the temperature control is accurate and stable, and it has the functions of fault alarm and automatic interruption.
Features
1. Smart LCD display, capable of displaying temperature, time, and program segments.
2. Equipped with power-off memory function to avoid data loss due to power failure or crash.
3. Optional 30-segment program functions.
4. The furnace body is made of fiber material, which has good thermal insulation effect, fast heating, and low temperature in the outer box.
5. Adopting an integrated structure, it can be used without secondary installation by the user.
6. Adopt non-touch point module to control heating output, small temperature fluctuation and high accuracy.
Principle
The muffle furnace adopts P.I.D microcomputer intelligent control mode. After setting the target temperature, the meter automatically adjusts the heating output power through the microcomputer algorithm according to the deviation of the real-time temperature and the set value, so as to achieve accurate and stable temperature control. When the system detects a fault, it will automatically trigger an alarm and cut off the heating current.
Applications
Laboratory heat treatment, material sintering, ash determination, sample ashing, high temperature experiment
Standards
National C-class furnace standard
Steps
1. Place the equipment in a stable and well-ventilated position.
2. Connect the AC220V +/- 10% 50~ 60Hz power supply.
3. Set the desired temperature, time or program segment through the smart LCD display.
4. After confirming that the parameters are correct, start the equipment to start heating.
5. During the working process, the real-time temperature and time can be monitored through the monitor.
6. After the work is completed, the equipment will automatically stop heating, and subsequent operations can only be carried out after the temperature in the furnace has dropped to a safe range.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Power frequency meets the requirements of AC220V +/- 10% 50~ 60Hz.
The furnace body temperature is very high when the equipment is working and just stops working, so do not touch it to prevent burns.
Do not heat flammable, explosive or toxic items in the furnace.
• When the equipment malfunctions and alarms, it should be checked for power failure in time, and it can be used again after troubleshooting.
• Regularly check the power cord and Appearance of the equipment to ensure no damage or aging.
• The furnace size is 300 * 200 * 120mm, do not put items that exceed this size or the carrying capacity of the furnace.
