Overview
RONGHUA INSTRUMENT DNP-9272-1 electric thermostatic incubator is a vertical structure thermostatic equipment, suitable for bacterial storage and biological foster in **, biological, agricultural, scientific research and other departments. The box is made of good steel plate, the surface is painted, and the inner door is designed with tempered Glass. The contents of the box can be clearly observed without opening the inner door. The studio is made of steel plate, the shelf can be moved and adjusted in height, and it is equipped with silicone rubber sealing ring to ensure sealing.
Features
1. Vertical structure design, the box and the outer door are made of good steel plate, the surface is painted, and the inner door is tempered Glass, which is convenient for observing foster items.
2. The studio is made of steel plate, the shelf can be moved and the height can be adjusted arbitrarily, and the operation is flexible.
3. There is a silicone rubber sealing ring between the studio and the inner door to ensure the sealing performance.
4. Three flat panel heaters are installed on the left, right and bottom of the outer wall of the studio, and a low-noise small fan is installed on the top to ensure the temperature uniformity in the box through breeze blowing.
5. The box shell and the studio are filled with ultra-fine Glass cotton insulation material to improve the thermal insulation effect.
6. The power switch, power indicator and temperature controller are all set in the upper part. The temperature controller has High Accuracy Temperature Control, Digital Display Set Temperature and Cabinet Temperature, Set Temperature Protection Device and Tracking Alarm Function.
Principle
The electric thermostatic incubator is heated by flat heaters on the left, right and bottom of the outer wall of the studio. The low-noise small fan at the top blows the breeze to promote the air circulation in the box and ensure the uniform distribution of temperature. The thermostatic incubator precisely controls the heating process to achieve stable maintenance of the set temperature and monitors the temperature in the box in real time through digital display.
Applications
**, biology, agriculture, scientific research
Steps
1. Connect the power supply, turn on the power switch, and observe whether the power indicator light is on.
2. Set the required temperature through the thermostat, and use the digital display function to confirm the setting value and the temperature in the box.
3. Put the foster items in the studio and adjust the shelf height as needed.
4. Close the inner door and ensure that the silicone rubber sealing ring is effectively sealed.
5. Monitor the temperature in the box, and the temperature controller automatically maintains the set temperature. If there is any abnormality, the tracking alarm function will be triggered.
6. After use, turn off the power switch and remove the item.
Notice
• Make sure the Power frequency is 220V and 50Hz before use to avoid damage to the equipment due to voltage mismatch.
• Pay attention to the protective device when setting the temperature to prevent misoperation.
• Avoid blocking the fan trend when placing items to maintain temperature uniformity.
• Regularly check whether the silicone rubber sealing ring is in good condition to ensure the sealing performance.
In case of an alarm during operation, immediately check the temperature setting and the condition in the box.
• Avoid using corrosive cleaners when cleaning to prevent damage to the surface of the box.
