Overview
The QNix ® 9500 Probe is a new design, with a small and sturdy shape, and is available in Fe, NFe, Fe/NFe dual-purpose types. The Probe has built-in LED lights to indicate whether the measurement value is over the limit, without the need to check the host display. The product features an integrated design with built-in Probe, and an interchangeable external Probe with a Modular design is also available.
Features
1. Stainless steel Probe with protective film inside, IP65 dustproof and waterproof
2. Ruby Probe
3. Chemical resistant material, suitable for chemical cleaning (acetone, nitro diluted, ethanol)
4. Probe with LED indicator light
5. Probe line is drag chain type, can be bent arbitrarily
6. Each Probe memory electronic version calibrated certificate can be loaded into the test report through the PC
Principle
Based on the principle of magnetic Induction measurement, suitable for iron-based and non-iron-based material coating thickness detection.
Applications
Coating thickness measurement, industrial testing, quality control
Standards
DIN EN ISO 2808、DIN 50981、DIN 50984、ISO 2178、BS 5411 (3 & 11)、BS 3900-C5、ASTM B 499、ISO 2360、ASTM D 1400、ASTM D 1186、ASTM D 7091
Steps
1. Connect Probe to host
2. Place the Probe on the surface to be tested
3. Observe the LED light prompt measurement status
4. Read measurements
5. Load the electronic calibrated certificate to the test report through the PC
Notice
• Ensure that the minimum measurement surface is φ 20mm
• Minimum radius of curvature is 20mm
• The thinnest substrate is 0.2mm
• operation temperature range -20~ 70 ℃
• Maximum workpiece surface temperature 80 ° C for continuous measurement
• Storage temperature range -20~ 70 ℃
• Avoid use under conditions beyond specifications
