Overview
The QNix ® 9500 Probe is a new design, with a small and sturdy appearance, and is available in Fe, NFe and Fe/NFe dual-purpose models. The Probe has built-in LED lights to indicate that the measurement value is over the limit, without the need to check the host display. The product adopts an integrated design with built-in Probe, and can also choose an interchangeable external Probe with a Modular design.
Features
1. Stainless steel Probe with protective film inside, IP65 dustproof and waterproof
2. Ruby Probe
3. Chemical resistant material, suitable for chemical cleaning (acetone, nitro diluted, ethanol)
4. Probe with LED indicator light
5. Probe line is drag chain type, can be bent arbitrarily
6. Each Probe memory electronic version calibrated certificate can be loaded into the test report through the PC
Principle
Probe uses magnetic Induction and eddy Current measurement principles to measure coating thickness by sensing substrate material properties.
Applications
Coating thickness measurement, industrial testing, quality control
Standards
DIN EN ISO 2808、DIN 50981、DIN 50984、ISO 2178、BS 5411 (3 & 11)、BS 3900-C5、ASTM B 499、ISO 2360、ASTM D 1400、ASTM D 1186、ASTM D 7091
Steps
1. Connect the Probe to the host
2. Probe placed on the test surface for measurement
3. Observe the LED light prompt measurement status and over-limit situation
4. Load the electronic calibrated certificate of Probe memory to the test report through the PC
Notice
• Minimum measurement surface is φ 20mm
• Minimum radius of curvature is 20mm
• Thinnest substrate requirements: Fe material 0.2mm, NFe material 0.05mm
• operation temperature range -20~ 70 ℃
• Maximum workpiece surface temperature 80 ° C for continuous measurement
• Storage temperature range -20~ 70 ℃
Probe Protection Rating IP65
• Confirm compatibility when using chemical cleaning agents
