Overview
The QNix ® 9500 Probe is a small and rugged Probe with a new design, available in Fe, NFe and Fe/NFe dual-purpose models. The Probe has built-in LED lights to indicate whether the measurement value is over the limit, without the need to check the host display. The product is designed with an integrated built-in Probe, and an interchangeable external Probe with a Modular design is also available.
Features
1. Stainless steel Probe with protective film inside, IP65 dustproof and waterproof
2. Ruby Probe
3. Chemical resistant material, suitable for chemical cleaning (acetone, nitro diluted, ethanol)
4. Probe with LED indicator light
5. Probe line is drag chain type, can be bent arbitrarily
6. Each Probe memory electronic version calibrated certificate can be loaded into the test report through the PC
Principle
Probe uses magnetic Induction and eddy Current measurement principles, with built-in LED lights to alert measurement status and overrun in real time.
Applications
Coating thickness measurement, industrial testing, quality control
Standards
DIN EN ISO 2808、DIN 50981、DIN 50984、ISO 2178、BS 5411 (3 & 11)、BS 3900-C5、ASTM B 499、ISO 2360、ASTM D 1400、ASTM D 1186、ASTM D 7091
Steps
1. Connect the Probe to the host
2. Place the Probe on the surface to be tested
3. Observe the status of the LED indicator to determine whether the measurement value exceeds the limit
4. Load the electronic calibrated certificate of Probe memory to the test report through the PC
Notice
• operation temperature range -20~ 70 ℃
• Storage temperature range -20~ 70 ℃
• Maximum workpiece surface temperature 80 ° C for continuous measurement
• Minimum measurement surface is φ 20mm
• The minimum radius of curvature is 20mm
• Thin substrate requirements: 0.2mm (F), 0.05mm (N)
