Overview
BENTING CSX-8-10 resistance furnace is an integrated design of laboratory heating equipment, using closed aluminum silicate furnace and lightweight insulation bricks to ensure the full utilization of heat, the maximum temperature can reach 1000 ℃, furnace volume is 16L, rated power 8KW.
Features
1. Integrated design, lightweight and compact structure
2. Closed aluminum silicate furnace, lightweight insulation brick to ensure the full use of heat
3. Parallel side-opening furnace door to keep the hot end away from operation
4. Combination of PID Microcomputer Air Instrument and Precision Sensor for Accurate Temperature
5. Dedicated function keys to achieve temperature setting
6. Auxiliary menu, realize over-rise alarm, deviation correction, menu lock
7. Optional exhaust device, conducive to ashing
8. Nickel-chromium-aluminum alloy heating wire is closed and embedded in the aluminum silicate furnace to reduce the corrosion of volatile gas on the heating wire
Principle
The resistance furnace generates heat through the nickel-chromium-aluminum alloy heating wire, using a three-sided heating method and a phased heating mode. The PID microcomputer controller and the K-type Thermocouple Sensor cooperate to achieve precise temperature control to ensure that the Temperature Fluctuation is within the range of +/- 5%.
Applications
Laboratory heating, material heat treatment, sample ashing
Steps
1. Use the touch of four buttons to set the temperature
2. Select fixed-value operation, regular operation or automatic stop mode
3. Set the Timer Range from 0 to 9999 minutes
Step 4 Start the heating program
Notice
● Pay attention to the setting of the over-rise alarm function
● Use the menu lock function to prevent misoperation
● Pay attention to the installation position when selecting the exhaust device
Regularly check the status of the heating wire
● Power frequency matching AC380V/12A 50/60Hz
