Overview
The BENTING CSX-2.5-12 resistance furnace is a laboratory heating equipment with a maximum temperature of 1200 ° C. It adopts an integrated lightweight and compact design. It is equipped with a closed aluminum silicate furnace and a nickel-chromium-aluminum alloy heating wire, combined with a PID microcomputer temperature control system to ensure accurate and stable temperature.
Features
1. Integrated design, lightweight and compact structure
2. Closed aluminum silicate furnace, lightweight insulation brick to ensure full use of heat
3. Parallel side-opening furnace door to keep the hot end away from operation
4. PID Microcomputer Thermostat Combined with Precision Sensor for Accurate Temperature
5. Dedicated function keys to achieve temperature setting
6. Auxiliary menu to achieve over-rise alarm, deviation correction, menu lock
7. Optional exhaust device, conducive to ashing
8. Nickel-chromium-aluminum alloy heating wire is closed and embedded in the aluminum silicate furnace to reduce the corrosion of volatile gas on the heating wire
Principle
The resistance furnace generates heat through the heating wire of nickel-chromium-aluminum alloy, and adopts the three-sided heating method to heat up the closed aluminum silicate furnace in stages. The PID microcomputer temperature control system cooperates with the K-type Thermocouple Sensor to monitor and precisely control the temperature in the furnace in real time to ensure the stable and reliable heating process.
Applications
Laboratory heating, material ashing, heat treatment
Steps
1. Use the touch of four buttons to set the temperature
2. Select the operation mode: fixed value operation, regular operation or automatic stop
3. Set Timer Range 0~ 9999 minutes
Step 4 Start the heating program
5. Monitoring temperature display: 4-digit digital upper display to measure the temperature, and lower display to set the temperature
Notice
● Note that the over-rise alarm function is enabled
● Use the menu button lock function to prevent misoperation
● Pay attention to the installation position when selecting the exhaust device
● Power frequency AC380V/12A 50/60Hz
Pay attention to the high temperature of the furnace surface and avoid direct contact
