Overview
BENTING CSRJX-8-13 resistance furnace is a high temperature equipment with double-sided heating of silicon carbide rods, the maximum temperature can reach 1300 ° C, and the furnace volume is 18L. The product adopts an integrated design, compact structure, and is equipped with a PID microcomputer temperature control system to ensure the accuracy and stability of temperature control.
Features
1. Integrated design, lightweight and compact structure
2. Closed aluminum silicate furnace, lightweight insulation brick to ensure the full use of heat
3. Parallel side-opening furnace door to keep the hot end away from operation
4. PID Microcomputer Thermostat Combined with Precision Sensor for Accurate Temperature
5. Dedicated function keys to achieve temperature setting
6. Auxiliary menu, realize over-rise alarm, deviation correction, menu lock
7. Optional exhaust device, conducive to ashing
8. Silicon carbide rod heating, rapid heating, high thermal efficiency
Principle
The resistance furnace adopts silicon carbide rod double-sided heating method, and realizes temperature control through phased heating. The PID microcomputer temperature control system cooperates with the K-type Thermocouple Sensor to accurately monitor and adjust the temperature in the furnace to ensure that the temperature is stable at the set value.
Applications
Laboratory heating, material heat treatment, industrial ashing
Standards
Comply with relevant electrical safety standards
Steps
1. Connect the AC380V power supply
2. Set the target temperature by tapping the four buttons
3. Select the operation mode (fixed value operation, regular operation or automatic stop)
4. Set timer time (0-9999 minutes)
Step 5 Start the heating program
6. Monitor the temperature display (4-digit digital tube displays the measured temperature and set temperature)
7. Automatic stop or manual shutdown after heating is completed
Notice
• Power frequency AC380V/12A 50/60Hz before use
• Pay attention to high temperature parts during operation to avoid burns
• Regularly check heating elements and temperature control systems
• Ensure good ventilation when using optional exhaust
• Pay attention to the weight of the equipment (net weight 190kg, gross weight 210kg), be careful when handling
• Keep the equipment clean to avoid the accumulation of debris
