Overview
BENTING CBJX-70B incubator is a special equipment suitable for scientific research institutions and production departments such as environmental protection, agriculture and livestock, drug inspection, and aquatic products. It is mainly used for water analysis, BOD determination, and the fostering and preservation of bacteria, molds, and microorganisms.
Features
1. Mirror stainless steel studio, four-corner semi-circular arc transition, easy to clean, adjustable pallet spacing.
2. Microcomputer control system, accurate and reliable temperature control, large-screen LCD multi-group data display, touch the operation button, equipped with ultraviolet sterilization lamp.
3, independent humidification, sterilization, temperature limit alarm system, over-temperature alarm and automatic interrupt function.
4. The left side of the box is equipped with a φ 52mm test hole, which is convenient for temperature measurement and external power supply connection.
5, double-decked sealing door structure, inner door tempered Glass with silicone strip, outer door magnetic strip, easy to open and close sealing well.
6, brand Compressor, fluorine-free refrigeration.
7, ultrasonic humidifier, intelligent atomization of water particles, good humidification effect, manual humidity control mode.
Principle
The incubator precisely adjusts the temperature and humidity through a microcomputer control system, uses fluorine-free refrigeration and ultrasonic humidification technology, combined with ultraviolet sterilization lamps and an independent alarm system to ensure a stable internal environment, suitable for microbial fostering and preservation.
Applications
Environmental protection, agriculture and livestock, drug inspection, aquatic products, scientific research institutions, production departments
Steps
Connect the power supply to ensure that the voltage is 220V/50Hz.
2. Set the required temperature, humidity and timing parameters through the microcomputer control system.
3. Place the sample and adjust the spacing of the pallets.
4. Start the equipment, monitor the running status, and use the test hole for measurement if necessary.
5. After use, turn off the power and clean the studio.
Notice
• Ambient Temperature should be maintained at 5-30 ° C and humidity should not exceed 50% RH.
• Avoid over-temperature use and pay attention to the alarm system prompt.
• Regularly clean the studio to ensure that the sealing door is intact.
• When manually controlling humidity, adjust the humidity settings as required.
• When using test holes, pay attention to safe operation.
