Overview
BENTING CBGDW-225L low/high temperature test chamber is a professional Environmental performance equipment, suitable for product performance testing under high temperature and low temperature conditions. The equipment is made of high-quality materials, with precise temperature control and stable operating performance, ensuring the reliability of test results.
Features
1. Enclosure Material is cold plate paint, the inner wall is made of good mirror stainless steel plate, and the box insulation material is fiberglass.
2. Single open hinged door design, equipped with observation window, lighting and window/door frame anti-condensation electric heating device.
3. Control panel integrated controller display, U disk interface, RS232 computer communication interface, power switch, status indicator and sound and light alarm device.
4. The unit includes refrigeration unit, water tray, drain hole, condenser fan, condenser inlet trend and supply water tank.
5. The power distribution system includes IO board, machine tool transformer, ballast, intermediate relay, solid state relay, AC contactor, thermal relay, fuse, underphase relay and air switch.
6. The control system automatically adjusts the operation of the refrigerator to achieve energy savings.
7. The evaporator cooling capacity is switched by the control system driving the solenoid valve.
Principle
The low/high temperature test chamber realizes temperature control through the refrigeration system and the heating system. The refrigeration system adopts a fully enclosed low-noise rotor Compressor and an air-cooled heat exchanger (optional Water-Cooled type), and uses a binary cascade refrigeration method in the range of -40 ° C to -70 ° C. The control system automatically adjusts the operating state according to the set conditions to ensure accurate and stable temperature.
Applications
Electronics testing, materials research, automotive parts testing, aerospace component testing, industrial product reliability verification
Steps
1. Connect the power supply and turn on the power switch of the device.
2. Set the required temperature parameters through the control panel.
3. Start the test program, and the device will automatically run and monitor the status.
4. After the test is completed, turn off the device and disconnect the power supply.
Notice
It is forbidden to test products that may produce flammable, explosive, volatile, highly toxic, corrosive and radioactive substances.
• Ensure that the equipment operates under rated voltage and environment.
• Regularly check the refrigeration system and electrical components to prevent malfunctions.
• Pay attention to safety during operation and avoid touching high or low temperature parts.
