Overview
BENTING CBGDW-1000L low/high temperature test chamber is a professional Environmental performance equipment, providing a wide temperature range of -70 ℃ to 150 ℃, suitable for temperature adaptability verification of various products. The box adopts cold plate paint outer box and mirror stainless steel inner wall, equipped with advanced control system and energy-saving refrigeration unit to ensure test accuracy and stability.
Features
1. Enclosure Material is cold plate paint, the inner wall is made of good mirror stainless steel plate
2. The box insulation material is fiberglass, effective insulation
3. Single open hinged door design, equipped with observation window, lighting and anti-condensation electric heating device
4. Control panel integrated controller display, U disk interface, RS232 communication interface and sound and light alarm
5. The refrigeration unit is equipped with a water receiving tray, a drain hole, a condensing fan, and a supply water tank
6. The power distribution system includes components such as IO boards, transformers, relays, contactors, etc
7. The control system automatically adjusts the operation of the refrigerator to achieve energy savings
8. The evaporator cooling capacity is switched through the solenoid valve
Principle
The test chamber is cooled by a fully enclosed low-noise rotor Compressor driven by a control system, and a binary cascade refrigeration method is used to achieve a low temperature range of -40 ° C to -70 ° C. The temperature adjustment is switched by the solenoid valve to the evaporator cooling capacity, and the Air-Cooled or Water-Cooled heat exchanger is combined to maintain the temperature stability of the box to ensure that the test environment meets the set parameters.
Applications
Electronics, automotive parts, materials research, industrial products
Steps
1. Connect the power supply and turn on the device switch.
2. Set the required temperature range through the control panel
3. Start the test program to monitor temperature fluctuations and uniformity
4. After the test is completed, turn off the equipment and clean the cabinet
Notice
Prohibit testing for flammable, explosive, volatile, highly toxic, corrosive, and radioactive substances
• Make sure the equipment is well grounded to avoid electrical failures
• Regularly inspect the refrigeration system and power distribution components
• Pay attention to high temperature and low temperature protection during operation
• Keep the box clean to prevent impurities from affecting the test accuracy
