Overview
TAISITE 101-0AB electric air blowing dryer is a laboratory drying equipment with transverse wind circulation structure. It has convenient operation functions, such as fixed value operation, regular operation and automatic stop, and has auxiliary menu functions such as over-rise alarm and deviation correction to ensure safety and accuracy.
Features
1. The use of transverse wind circulation structure is conducive to air mixing, high space utilization, and fast drying rate.
2. Easy to operate, support fixed-value operation, regular operation and automatic stop function.
3. Special function keys to achieve temperature setting, auxiliary menu can achieve over-rise alarm, deviation correction and menu lock.
4. The forced fan cooling intake structure is adopted, so that the maximum operating temperature of the fan is < 50 ° C, ensuring long-term operation.
5. Equipped with safety features such as over-rise alarm and menu locking.
Principle
The drying oven generates heat through an internal heater (stainless steel heating tube) and uses a forced convection fan to form a lateral wind circulation, so that the hot air flows evenly in the studio (liner), resulting in fast and uniform heating and drying. Its PID Temperature Control system precisely adjusts the Heating power to maintain the set temperature.
Applications
Laboratory sample drying, material heat treatment, electronic component aging, food baking, chemical industry, pharmaceutical research and development, agricultural research, teaching experiment
Steps
1. Turn on the power supply (AC220V).
2. Set the required temperature and time (0 to 9999 minutes) by tapping the four buttons.
3. Select the operation mode (fixed-value operation or regular operation).
4. Start the equipment and start heating and blowing.
5. The device will automatically stop after running, or stop after reaching the set time.
Notice
* Equipment should be placed in a well ventilated environment.
Do not exceed the maximum temperature of 250 ° C when using.
* The maximum load of a single shelf is 15kg, do not overload.
Pay attention to the smoothness of the exhaust port, which can be adjusted as needed.
During operation or just after the end, the temperature inside the cabinet is very high. Do not touch it directly to prevent burns.
* Before use, please confirm that the Power supply voltage is consistent with the equipment requirements (AC220V).
Regularly check the operating status of the equipment to ensure that safety devices such as over-lift alarms are effective.
