Overview
TAISITE 101-0D electric air blowing dryer is a laboratory drying equipment with transverse wind circulation structure, with efficient drying rate and good space utilization. Temperature range is room temperature + 10 ℃ to 250 ℃, Temperature Fluctuation +/- 1.0 ℃, Temperature Uniformity +/- 2.5%, suitable for drying, baking and other applications where temperature accuracy is required.
Features
1. The use of transverse wind circulation structure is conducive to air mixing, high space utilization, and fast drying rate.
2. Convenient operation, support fixed-value operation, regular operation and automatic stop function.
3. Special function keys to achieve temperature setting, auxiliary menu supports over-rise alarm, deviation correction and menu lock.
4. The forced fan cooling intake structure is adopted to ensure that the maximum Operating temperature of the fan is lower than 50 ° C to ensure long-term operation.
5. Equipped with safety design, including over-lift alarm and menu lock function.
6. Multi-functional control panel and exhaust hole design, intuitive operation, diverse functions.
Principle
The drying oven works by forced convection of the side air duct. The built-in stainless steel heating tube generates heat, which is driven by the fan to form a transverse circulating airflow, so that the hot air in the working room is evenly distributed. The digital tube dual-row PID temperature Control mode is used to accurately monitor the temperature through the Pt100 temperature sensor and adjust it according to the set value to achieve an accurate and stable temperature environment.
Applications
Laboratory sample drying, material baking, heat treatment, thermostatic testing
Steps
1. Turn on the power supply (AC220V).
2. Set the required temperature and timing time (0-9999 minutes) by tapping the four buttons.
3. Select the operation mode: fixed-value operation or regular operation.
4. The equipment starts to work by forced convection heating and maintaining the set temperature.
5. After the operation, the device will automatically stop, or stop according to the timing setting.
Notice
• Power supply voltage meets requirements (AC220V/5.5A 50/60Hz).
• The maximum load of a single shelf is 15kg, please do not overload it.
• When the equipment is running, do not block the exhaust port at the top (φ 28mm).
• Please confirm whether the liner material (stainless steel plate) is suitable for your sample before use.
• Pay attention to the safety device of the equipment. If an over-lift alarm is triggered, please check it in time.
• Menu lock function can be used to prevent misoperation.
• The device has power outage compensation and memory functions, but you still need to pay attention when restarting after a sudden power outage.
• Do not place flammable or explosive items around the equipment.
