Overview
TAISITE MJX-150Bⅲ mildew incubator is a professional equipment for mold fostering, providing precise temperature and Humidity control. The product uses forced convection thermostatic mode, Temperature range is 0~ 65 ℃ without humidification, 10~ 65 ℃ with humidification, Temperature resolution up to 0.1 ℃, Fluctuation high temperature +/- 0.5 ℃, low temperature +/- 1 ℃, uniformity +/- 1 ℃, to ensure Stability and Reliability of the foster environment.
Features
1. Humidity control is achieved by independent humidification, and the temperature is set by a dedicated function key.
2. LCD multi-data full-screen operation display, support power outage memory and power outage compensation.
3. Convenient operation, including fixed-value operation, regular operation and automatic stop function.
4. Auxiliary menu provides over-rise alarm, deviation correction and menu lock.
5. Turbine centrifugal forced air supply to ensure more uniform temperature.
6. Power-off protection, parameter memory and call recovery, Compressor overload protection.
7. Safety lock design, easy to operate and safe.
8. Multi-function control panel, support touch button settings.
9. Ultraviolet sterilization function enhances hygiene and safety.
Principle
The Mildew incubator achieves uniform temperature distribution through forced convection, using stainless steel heating tube heating and air-cooled closed Compressor cooling, and the refrigerant is R134A. The temperature control uses a single-stage liquid crystal PID system, which precisely monitors the temperature through the PT100 Sensor, and supports manual defrosting and humidity control. The equipment uses a turbo centrifugal forced air supply system to ensure that the temperature Fluctuation and uniformity in the box meet the set requirements.
Applications
Mold fostering, microbiological experiments, laboratory research
Steps
1. Turn on the power supply and set the temperature parameters.
2. Use the touch button to set the temperature, and the LCD displays the current and set temperature.
3. Select the operation mode: fixed-value operation, regular operation or automatic stop.
4. Enable UV sterilization function as required.
5. Monitor the running status and use the auxiliary menu for deviation correction or menu locking.
6. After the operation is completed, the device automatically stops or is manually shut down.
Notice
• Power supply voltage is AC 220V/3.6A 50/60Hz to avoid overload.
• Check safety devices such as over-lift alarms and overload protection functions before use.
• When manually defrosting and controlling moisture, follow the operating instructions to prevent equipment damage.
• Shelf bearing no more than 15kg to avoid overloading.
• Regularly clean the liner mirror stainless steel plate to maintain hygiene.
• After a power outage, the device automatically remembers the parameters and checks the running status after power is restored.
• Avoid operating in humid environments in case of electrical failure.
