Overview
TAISITE MFLC-7/12D ceramic muffle furnace is a laboratory heating equipment with a maximum operating temperature of 1200 ° C. It adopts an integrated lightweight and compact design, equipped with polycrystalline mullite fiber furnace and special alloy heating wire three-sided heating, combined with High Accuracy Microcomputer PID Temperature Controller and K-type Thermocouple, to achieve good Temperature uniformity and temperature control accuracy.
Features
1. Integrated lightweight and compact design.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Special alloy (OCr27AL7Mo2) heating wire three-sided heating, Temperature uniformity.
4. Open the door and power off, reset delay safety design.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, which is conducive to ashing.
7. High Accuracy Microcomputer PID Thermostat Combined with Precision Sensor for Accurate Temperature.
8. Dedicated function keys enable temperature setting.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. Parallel side open furnace door design keeps the hot end away from the operator.
11. Equipped with correction function and gating function.
12. Equipped with overcurrent and leakage protection switch.
Principle
The muffle furnace precisely adjusts the Power supplied to the special alloy heating wire through a microcomputer PID Control system. The heating wire is arranged on three sides of the furnace to radiate heating of the sample placed in the polycrystalline mullite fiber furnace. The K-type Thermocouple monitors the temperature in the furnace in real time and feeds it back to the temperature controller, which dynamically adjusts the Heating power through the PID algorithm to achieve fast and stable heating and accurate temperature control.
Applications
Material ashing, Sample heat treatment, Laboratory high temperature sintering, Ceramic firing, Metal heat treatment, Glass annealing, Chemical analysis
Steps
1. Turn on the power supply (AC220V).
2. Set the target temperature and time (Timer Range 0~ 999.9 hours) by tapping the button.
3. Start the equipment to start heating.
4. During the heating process, the real-time temperature can be observed through the dual-line LED display.
5. After reaching the set time or completing the experiment, the equipment stops heating.
6. After the furnace temperature has dropped to a safe range, open the parallel side open furnace door to remove the sample.
Notice
* Operating temperature is 1200 ℃, Temperature range is 300~ 1200 ℃.
* The furnace door is automatically powered off when it is opened, and there is a delay in the resumption of power after closing. Please pay attention to safety.
* The surface of the furnace body may still heat up during heating, do not touch it, and pay attention to ventilating.
* Do not exceed Rated power (3KW) and voltage (AC220V/13.6A).
When using the exhaust hole, please pay attention to the safety of the pipeline connection.
* The equipment is heavy (gross weight 65kg), so pay attention when moving.
* When performing operations such as temperature correction, please refer to the manual to use the auxiliary menu function.
Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
