Overview
TAISITE MFLC-24/12D ceramic muffle furnace is a laboratory heating equipment with a maximum temperature of 1200 ° C. It adopts an all-in-one lightweight and compact design, furnace volume is 24L, equipped with High Accuracy Microcomputer PID Temperature Controller and K-type Thermocouple, temperature control accuracy can reach +/- 1 ° C, and has a variety of safety and auxiliary features.
Features
1. Integrated design, lightweight and compact structure.
2. The vacuum forming polycrystalline mullite fiber furnace has good thermal insulation effect; the special nickel-chromium-aluminum alloy heating wire is heated on three sides, and the Temperature uniformity is high.
3. Equipped with safety functions such as door opening and power failure, reset delay, etc.
4. Double shell air insulation design, low surface temperature.
5. An exhaust device is provided to facilitate sample ashing.
6. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor for Accurate Temperature Control.
7. Dedicated function keys enable temperature setting, making operation convenient.
8. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
9. Parallel side open furnace door design keeps the hot end away from the operator.
10. The temperature control instrument has a correction function and a gating function.
11. Equipped with overcurrent and leakage protection switch.
Principle
Power output of heating element (Ni-Cr-Al alloy OCr27AL7Mo2) is precisely controlled by the microcomputer PID Control system of the muffle furnace according to the set temperature program or fixed value. The heating element performs three-sided heating on the vacuum-formed polycrystalline mullite fiber furnace. The excellent thermal insulation performance of the furnace works together with the double-shell air insulation structure to achieve rapid heating and uniform temperature field, and the temperature in the furnace is monitored in real time by K-type Thermocouple for feedback adjustment.
Applications
Material ashing, sample heat treatment, laboratory high temperature experiment
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the AC380V power supply.
2. Set parameters such as temperature and time by tapping the five buttons (D/P type) or setting through Touchscreen (T type).
3. Start the equipment to start heating operation.
4. After the operation, wait for the furnace body to chill down and then open the furnace door to take out the sample.
Notice
• The furnace body temperature is very high when the equipment is running and just after the end, do not touch it, and pay attention to the direction of the hot end of the parallel side open furnace door.
• The device will automatically power off when opening the door. There is a delay in repowering after closing the furnace door. Please follow the safe operation process.
• Power supply voltage is AC380V and properly connected to ground wire.
• Please confirm that the overcurrent and leakage protection switch function is normal before use.
• Do not exceed the maximum temperature of the equipment 1200 ℃ and Rated power operation.
• Sample placement in the furnace should not block the exhaust hole.
• Before moving or cleaning equipment, be sure to disconnect the power and wait for it to chill down completely.
