Overview
TAISITE MFLC-24/12P ceramic muffle furnace is a laboratory heating equipment with a maximum temperature of 1200 ° C. It adopts an all-in-one lightweight and compact design, equipped with vacuum forming polycrystalline mullite fiber furnace and special nickel-chromium-aluminum alloy heating wire for three-sided heating, combined with High Accuracy Microcomputer PID Temperature Controller and K-type Thermocouple to achieve precise temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Special alloy heating wire three heating, Temperature uniformity.
4. Open the door and power off, and the reset is delayed to ensure safe operation.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, it is conducive to the ashing process.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor for Accurate Temperature Control.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. Parallel side open furnace door design keeps the hot end away from the operator.
11. Provide a variety of models (D/P/T type) temperature control instrument options, with diverse functions.
Principle
The muffle furnace receives the temperature signal detected by the K-type Thermocouple through the microcomputer PID Control system, compares and calculates with the set temperature, and then precisely adjusts the Power output of the nickel-chromium-aluminum alloy heating element to achieve accurate control and stability of the temperature in the furnace. Its three-sided Heating mode combined with the excellent thermal insulation performance of the polycrystalline mullite fiber furnace ensures good Temperature uniformity.
Applications
Material ashing, sample sintering, heat treatment, laboratory high temperature experiment
Steps
1. Connect the AC380V power supply.
2. Set the target temperature, program Linear dispersion or timing time by tapping the button or Touchscreen (depending on the model).
3. Start the equipment to start heating.
4. The device runs according to the set program. After reaching the set time or temperature, it can automatically stop or enter the next program section.
5. After the experiment, wait for the furnace temperature to naturally chill down or cool down according to the specified procedure.
6. Open the furnace door and remove the sample.
Notice
• The device needs to use AC380V power supply, please make sure the power supply matches.
• When the furnace door is opened, the power will be automatically cut off. There will be a delay in the return of power after closing. Please pay attention to safety.
• During high temperature operation and just after operation, the surface of the furnace body may still be very hot, do not touch it, and beware of burns.
• Do not heat flammable, explosive or toxic gases in the furnace.
• Make sure the exhaust hole is unobstructed when using it.
• The equipment is heavy (gross weight 98kg), so pay attention when handling and installing.
• Please perform temperature correction regularly to ensure temperature control accuracy.
• The overcurrent leakage protection switch is an important safety device, please do not disassemble it without permission or make it ineffective.
