Overview
TAISITE MFLC-24/12T ceramic muffle furnace is a laboratory high temperature equipment with a maximum temperature of 1200 ° C, with an all-in-one lightweight and compact design. It is equipped with a vacuum forming polycrystalline mullite fiber furnace and a special nickel-chromium-aluminum alloy heating wire for three-sided heating, combined with a High Accuracy microcomputer PID temperature controller and K-type Thermocouple for precise temperature control.
Features
1. Integrated lightweight and compact design.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Special alloy heating wire three heating, Temperature uniformity.
4. Double shell air insulation, low surface temperature.
5. Equipped with exhaust holes, conducive to ashing.
6. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor, Temperature control accuracy up to +/- 1 ℃, Temperature resolution 1 ℃.
7.7 inch color Touchscreen program temperature control (T type), setting method is finger touch light point.
8. Equipped with a variety of safety functions: door opening and power failure, reset delay, over-rise alarm, menu lock, over-rise prevention, over-current and leakage protection switch.
9. Parallel side open furnace door design keeps the hot end away from the operator.
10. With correction function, gating function, real-time Linear dispersion recording and U disk data export and other ancillary functions.
Principle
The muffle furnace precisely adjusts the Power supplied to the heating elements of the nickel-chromium-aluminum alloy according to the set temperature program or fixed value through the microcomputer PID Control system. The heating elements are arranged on three sides in the furnace to heat the samples placed in the polycrystalline mullite fiber furnace. The K-type Thermocouple monitors the temperature in the furnace in real time and feeds it back to the Control system to form a closed loop for fast, stable and accurate heating and thermostatic control.
Applications
Material sintering, ashing experiment, heat treatment, high temperature synthesis, laboratory analysis
Steps
1. Connect the AC380V power supply.
2. Set the target temperature or run the program through the 7-inch color Touchscreen.
3. Start the heating, the equipment will run according to the set program or temperature.
4. After the operation is completed, open the parallel side open furnace door to remove the sample after the temperature in the furnace has dropped to a safe range.
5. Use a USB stick to export running data (if necessary).
Notice
Equipment needs to use AC380V power supply and ensure good grounding.
• Automatically power off when opening the door. There is a delay in power back after closing. Please pay attention to safety.
• The furnace body is at high temperature, and protective equipment needs to be worn during operation to avoid burns.
• Do not heat flammable, explosive or toxic gases in the furnace.
• Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
• The equipment is heavy (gross weight 98kg), so pay attention when moving and installing.
• Ensure that the furnace is clean after use to avoid residues affecting the life of the furnace and the experimental effect.
