Overview
TAISITE MFLC-12/13D ceramic muffle furnace is an all-in-one design, lightweight and compact high temperature heating equipment. It uses a vacuum forming polycrystalline mullite fiber furnace, combined with a High Accuracy microcomputer temperature controller and S-type Thermocouple, can achieve accurate temperature control from 300 ° C to 1300 ° C, temperature control accuracy of +/- 1 ° C, suitable for a variety of high temperature processing applications.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, it is conducive to the ashing process.
7. High Accuracy Microcomputer PID Thermostat Combined with Precision Sensor for Accurate Temperature.
8. Dedicated function keys enable temperature setting, making it easy to operate.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. Multiple safety designs, including over-lift alarm, menu lock, over-lift prevention, door opening and power failure, reset delay, and over-current and leakage protection switch.
Principle
The muffle furnace generates heat through a silicon carbide heating element, and the heat is evenly distributed in the furnace composed of polycrystalline mullite fibers. The microcomputer PID temperature controller receives the temperature signal in the furnace detected by the S-type Thermocouple, compares and calculates with the set value, and realizes the precise control of the temperature in the furnace by adjusting the Power output of the heating element to ensure that the temperature is stable within the set range.
Applications
Material ashing, high temperature heat treatment, sample sintering, laboratory high temperature experiment
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the power supply to ensure that the voltage meets the requirements (AC380V).
2. Set the target temperature and timing time by tapping the five buttons.
3. Start the equipment and start heating up.
4. The device enters the PID temperature control mode to maintain the set temperature.
5. After reaching the set time or completing the processing, the device can be automatically stopped or manually shut down.
6. After the furnace body is chilled down, the furnace door can be opened to take out the sample.
Notice
Equipment needs to be operated by professionals and grounded properly.
• Power supply voltage is checked before power on (AC380V/9.1A).
• It is strictly forbidden to put flammable, explosive, corrosion and harmful gases at the set temperature in the furnace.
• When the furnace door is opened, the automatic power-off function is started. After closing the furnace door, you need to wait for a delayed power-back. Please do not force the operation.
• During heating and high temperature operation, the surface of the furnace body may be high temperature, do not touch it, and keep the surrounding well ventilated.
Do not repair or clean the equipment while it is in operation.
• When not in use for a long time, please disconnect the power supply.
• Please pay attention to the Device weight (gross weight 85kg) when handling to avoid bumping.
• Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
