Overview
TAISITE MFLC-12/13P ceramic muffle furnace is a high temperature experimental equipment using imported program temperature control digital display. It adopts integrated design, light and compact structure, the highest Operating temperature can reach 1300 ℃, furnace volume is 12L, suitable for experimental processes such as ashing and sintering that require precise high temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, it is conducive to the ashing process.
7. High Accuracy Microcomputer Temperature Controller Combined with S-type Thermocouple Precision Sensor, the temperature control accuracy reaches +/- 1 ℃.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. Multiple safety designs, including over-lift alarm, menu lock, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The ceramic muffle furnace generates heat through silicon carbide rods as heating elements. Microcomputer PID control technology is used, combined with S-type Thermocouple Sensor to monitor the furnace temperature in real time. The temperature controller precisely adjusts the Heating power according to the setting program or fixed value, so that the furnace temperature can reach and maintain the target temperature quickly and stably. Polycrystalline mullite fiber furnace and double shell air insulation structure effectively reduce heat loss and achieve high efficiency and energy saving.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Steps
Connect the AC380V power supply to ensure reliable grounding.
2. Open the furnace door, put in the sample and close the furnace door.
3. Set the target temperature, program Linear dispersion or running time (0~ 999.9 hours) by tapping the five buttons.
4. Start the equipment and start heating.
5. During the experiment, the real-time temperature can be observed through a dual-row LED display.
6. After the program runs or reaches the set time, the equipment stops heating.
7. After the furnace temperature drops to a safe range, the furnace door can be opened to take out the sample.
Notice
Equipment must be reliably grounded and installed and debugged by professionals.
* When the furnace body is working and just after the work, the furnace and shell temperature is very high, do not touch, to prevent burns.
* When opening the door, the device will automatically power off. After closing the furnace door, you need to wait for the end of the reset delay before continuing to work.
* Do not heat flammable, explosive, volatile and corrosive gases in the furnace.
Sample placement should not block the exhaust hole to ensure smooth exhaust.
* Before use, please confirm that the Power supply voltage (AC380V) is consistent with the equipment requirements.
Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
* Before moving or cleaning equipment, be sure to turn off the power and wait for the equipment to chill down completely.
