Overview
TAISITE MFLC-12/13T ceramic muffle furnace is a laboratory high temperature equipment with an integrated lightweight and compact design. It uses silicon carbide heating elements, the maximum Operating temperature can reach 1300 ℃, Temperature range 300~ 1300 ℃, furnace volume is 12L, using 7 inch color Touchscreen for programmed temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller combined with S-type Thermocouple, temperature control accuracy of +/- 1 ℃.
8. Adopt 7-inch color Touchscreen, set by finger touch and light point.
9. With auxiliary menu, it can realize over-rise alarm, deviation correction, menu locking, over-rise prevention and other functions.
10. High safety, integrated with multiple protections such as over-lift alarm, menu locking, over-lift prevention, power failure when opening the door, and delay when restarting.
11. Support real-time Linear dispersion recording and U disk data export function.
Principle
The ceramic muffle furnace generates heat through the internal silicon carbide rod heating element to heat the polycrystalline mullite fiber furnace. The furnace temperature is detected in real time by the S-type Thermocouple, and the signal is fed back to the microcomputer PID temperature controller. The temperature controller performs precise PID calculations according to the set temperature program (supports fixed-value operation and 50-step program operation) to control the output of Heating power, so as to achieve accurate control and stability of the temperature in the furnace.
Applications
Material heat treatment, sample ashing, ceramic sintering, laboratory high temperature experiment
Steps
1. Connect the AC380V power supply.
2. Set the target temperature or program Linear dispersion with a 7-inch color Touchscreen light point.
3. Set the timing time (0 to 999.9 hours).
4. Start running, and the device starts to heat up according to the set program.
5. Linear dispersion can be observed in real time through Touchscreen during operation.
6. After the experiment is completed, the data can be exported to the USB flash drive.
7. After the furnace body is chilled down, turn off the power supply.
Notice
• The device needs to use an AC380V power supply with a rated current of 9.1A.
• When the furnace door is opened, the power will be automatically cut off. There will be a delay in the return of power after closing. Please pay attention to safety.
• Although the surface of the furnace body is designed for heat insulation, direct contact should be avoided during high temperature operation and just after completion.
Do not exceed the maximum operating temperature of 1300 ° C.
• The equipment is equipped with exhaust holes, please ensure that it is well ventilated during the experiment.
When moving your device, pay attention to its weight (Net weight 70kg/gross weight 85kg).
• Do not block or block the ventilated part of the device.
• When setting the program, the menu lock function can be used to prevent misoperation.
