Overview
TAISITE MFLC-12/14D ceramic muffle furnace is a laboratory high temperature equipment with a maximum operating temperature of 1400 ° C. It adopts an integrated lightweight and compact design, the furnace volume is 12L, equipped with a High Accuracy microcomputer PID temperature controller and S-type Thermocouple, the temperature control accuracy can reach +/- 1 ° C, the temperature rise is fast, and it is suitable for a variety of high temperature experiments such as material ashing, sintering, heat treatment, etc.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design saves space and keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, it is conducive to the ashing process.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor for Accurate Temperature Control.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. High safety, integrated with multiple protections such as over-lift alarm, menu locking, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The muffle furnace generates heat through the silicon carbide heating element, and the microcomputer PID controller compares and calculates the actual temperature in the furnace according to the S-type Thermocouple detected with the target temperature set by the user, and automatically adjusts the Heating power to achieve accurate temperature control. The furnace adopts polycrystalline mullite fiber material and cooperates with the double-shell air insulation design to effectively reduce heat loss and ensure uniform and stable temperature in the furnace.
Applications
Material ashing, sintering, heat treatment, high temperature experiment
Steps
1. Connect the AC380V power supply.
2. Set parameters such as temperature and time by tapping the five buttons.
3. Start the equipment to start heating operation.
4. After the experiment, wait for the furnace body to chill down and then open the door to take out the sample.
Notice
• The equipment needs to use AC380V power supply and is equipped with an overcurrent and leakage protection switch.
• When opening the door, the device will automatically power off, and there will be a delay in power back. Please pay attention to safety.
• The surface of the furnace body may still heat up during operation, so pay attention to avoid burns during operation.
Do not exceed the maximum operating temperature of 1400 ° C.
• Please ensure that the exhaust hole is unobstructed before use.
• Device weight (gross weight 85kg) when moving or installing.
