Overview
TAISITE MFLC-18/14P ceramic muffle furnace is a high temperature heating equipment with a maximum Operating temperature of 1400 ° C. It features an all-in-one lightweight and compact design with a vacuum formed polycrystalline mullite fiber furnace, silicon carbide rod heating elements, and a High Accuracy Microcomputer PID temperature control system with temperature control accuracy of +/- 1 ° C for a variety of high temperature processing applications.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design saves space and keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, it is conducive to the ashing process.
7. High Accuracy Microcomputer Thermocouple Combined with S-type Thermocouple for accurate temperature control.
8. Special function key to set the temperature, easy to operate.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise prevention and other functions.
10. Multi-point heat dissipation design to optimize equipment operation.
11. Provide a variety of temperature control instrument options such as D type (single-stage temperature control), P type (program temperature control) and T type (Touchscreen program temperature control).
Principle
The muffle furnace generates heat through the internal silicon carbide rod heating element, which is precisely adjusted by the microcomputer PID controller according to the temperature in the furnace detected by the S-type Thermocouple to achieve stable control of the set Temperature range. The heat is effectively insulated by the polycrystalline mullite fiber furnace, and the gas is discharged through the designed exhaust hole to complete the high temperature treatment of the materials in the furnace.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Standards
The information does not mention the specific standards met.
Steps
1. Connect the AC380V power supply.
2. Use a touch button or Touchscreen (depending on the model) to set the desired temperature, program, or timing parameters.
3. Start the equipment to start heating operation.
4. After the operation, wait for the furnace body to chill down and then open the furnace door to take out the sample.
5. Turn off the power after use.
Notice
• The furnace body temperature is very high when the equipment is running and just after the end, do not touch it, and be careful of burns.
• When opening the door, the device will automatically power off. There is a delay in repowering after closing the furnace door. Please pay attention to safety.
• Power supply voltage is AC380V and connected correctly.
• Do not use it beyond the maximum temperature of the device at 1400 ° C.
• When heating in the furnace, do not put flammable and explosive items.
Equipment should be used in a well-ventilated environment.
• Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
Before moving or maintaining equipment, be sure to disconnect the power supply.
• Please install and repair by professionals.
