Overview
TAISITE MFLC-18/14T ceramic muffle furnace is a high temperature heating equipment with a maximum temperature of 1400 ° C. It adopts an all-in-one lightweight and compact design. The furnace is made of vacuum formed polycrystalline mullite fiber, which has good thermal insulation effect. It is equipped with a High Accuracy Microcomputer PID Control system and S-type Thermocouple to ensure accurate temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, effective insulation.
3. Parallel side open furnace door design to reduce footprint and keep the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, which is conducive to ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor, Temperature control accuracy +/- 1 ℃, Temperature resolution 1 ℃.
8. Equipped with 7-inch color Touchscreen, support finger touch light point setting, intuitive display.
9. Support program operation (50 steps), fixed-value operation, timing (0~ 999.9 hours) and other functions.
10. With correction function, gating function, real-time Linear dispersion recording, U disk data export and other additional functions.
11. Complete safety devices, including over-lift alarm, menu lock, over-lift prevention, door opening and power failure, reset delay and over-current and leakage protection switch.
Principle
The muffle furnace generates heat through an internal silicon carbide rod heating element to heat the furnace composed of polycrystalline mullite fibers. The temperature is detected in real time by the S-type Thermocouple Sensor and fed back to the microcomputer PID temperature controller. The temperature controller precisely adjusts the Heating power through the PID algorithm according to the deviation of the set temperature and the measured temperature, so as to achieve fast and stable temperature control. The furnace body is designed with double shell air insulation to reduce heat loss and reduce surface temperature.
Applications
Material ashing, high temperature sintering, heat treatment, laboratory analysis
Steps
1. Connect the AC380V power supply.
2. Set the target temperature, program or running time through the 7-inch color Touchscreen.
3. Start the heating, the equipment will run according to the set program or temperature.
4. Linear dispersion can be observed in real time through Touchscreen during operation.
5. After the experiment, you can wait for the furnace body to naturally chill down or cool down according to the specified procedure.
6. If necessary, the running data can be exported through the USB flash drive.
Notice
• The device needs to use AC380V power supply, please make sure the power supply matches.
• When opening the door, the device will automatically power off, and there will be a delay in power back after closing the door again. Please pay attention to safety.
• The furnace surface temperature may still be high, and attention should be paid to preventing burns during operation.
Do not exceed the maximum operating temperature of 1400 ° C.
• When using the vent, make sure to ventilate well.
• Regularly perform temperature correction to ensure temperature control accuracy.
• Device weight (gross weight 95kg) when moving or installing.
