Overview
The TAISITE MFLC-12/16D ceramic muffle furnace is a laboratory high temperature equipment with a maximum temperature of 1600 ° C. It is an all-in-one lightweight and compact design, equipped with a vacuum-formed polycrystalline mullite fiber furnace and silicon molybdenum rod heating elements, combined with a High Accuracy microcomputer PID temperature controller and S-type Thermocouple to achieve precise temperature control of +/- 1 ° C.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor for Accurate Temperature Control.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. High safety, integrated with multiple protections such as over-lift alarm, menu locking, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The muffle furnace precisely adjusts the Power output of the heating element of the silicon molybdenum rod through the microcomputer PID Control system. The S-type Thermocouple monitors the temperature in the furnace in real time and feeds back the signal to the temperature controller. The temperature controller calculates the control amount through the PID algorithm according to the deviation of the set temperature and the measured temperature, so as to achieve fast, stable and accurate control of the furnace temperature, ensuring that the temperature accuracy reaches +/- 1 ° C.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Steps
1. Connect the AC380V power supply.
2. Set the target temperature and time by tapping the five buttons to set the digital display.
3. Start the device and start heating up.
4. The equipment works according to the setting program (running at a fixed value).
5. After the work, wait for the furnace body to chill down and then open the furnace door to take out the sample.
Notice
• The device needs to use AC380V power supply, please make sure the power supply matches.
• When opening the door, the device will automatically power off, and there will be a delay in power back. Please pay attention to safety.
• There may still be residual temperature on the surface of the furnace body, and protective equipment needs to be worn during operation.
Do not make unnecessary parameter modifications or open the furnace door while the equipment is running.
• Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
• Device weight (gross weight 170kg) when handling, be careful.
