Overview
The TAISITE MFLC-16/16D ceramic muffle furnace is a high temperature heating equipment with a maximum operating temperature of 1600 ° C. It is an all-in-one lightweight and compact design. Its core is a vacuum formed polycrystalline mullite fiber furnace and a silicon molybdenum rod heating device, combined with a High Accuracy microcomputer PID temperature controller and S-type Thermocouple, to achieve precise temperature control of +/- 1 ° C, suitable for a variety of high temperature processing applications.
Features
1. Integrated lightweight and compact structure design.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. It has the safety function of opening the door and power failure, and restarting the power delay.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, which is conducive to sample ashing and other processes.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor for Accurate Temperature Control.
8. Special function key to set the temperature, easy to operate.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise prevention and other functions.
10. Multiple safety designs: over-lift alarm, menu lock, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The muffle furnace generates heat through the heating element of silicon molybdenum rod, and the heat is evenly distributed in the furnace composed of polycrystalline mullite fibers. The S-type Thermocouple monitors the temperature in the furnace in real time and feeds the signal back to the microcomputer PID temperature controller. The temperature controller precisely adjusts the Heating power through the PID algorithm according to the deviation of the set temperature and the measured temperature, so as to achieve fast and stable temperature control.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, metal heat treatment, laboratory analysis
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the AC380V power supply to ensure good grounding.
2. Open the furnace door and place the sample to be processed.
3. Close the furnace door and the system will automatically power on (if the door is open and the power is cut off).
4. Set parameters such as target temperature and time by tapping the button.
5. Start the equipment and start the heating operation.
6. After the operation, wait for the furnace temperature to chill down naturally or operate according to the procedures.
7. Open the furnace door and take out the sample (automatically power off when opening the door).
Notice
Equipment must be reliably grounded and installed and operated by professionals.
When the furnace body is working and just after the work, the surface may be high temperature, do not touch, and keep away from flammable materials.
* When opening the door, the device will automatically power off, and there will be a delay in power back after closing the furnace door. Please do not force the operation.
* Samples and crucibles placed in the furnace must be resistant to high temperatures, and the total weight should not exceed the specified limit.
* The maximum temperature of the furnace shall not exceed 1600 ° C, and the long-term use temperature is recommended to be lower than the rated value.
* Do not open the furnace door for a long time during the heating process, so as not to affect the life of the heating element.
Regularly check the status of electrical connections and heating components.
When the equipment malfunctions or is abnormal, the power should be cut off immediately and a professional should be contacted for maintenance.
* Pay attention to the Operating Environment ventilator, and use the exhaust hole to connect the exhaust device.
