Overview
TAISITE MFLC-20/16D ceramic muffle furnace is a high temperature heating equipment with a maximum operating temperature of 1600 ° C and a furnace volume of 20L. It is an all-in-one lightweight and compact design, equipped with vacuum formed polycrystalline mullite fiber furnace and silicon molybdenum rod heating elements, combined with High Accuracy Microcomputer PID Thermocouple and S-type Thermocouple, to achieve precise temperature control, temperature control accuracy of up to +/- 1 ℃.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, it is conducive to the ashing process.
7. High Accuracy Microcomputer Thermostat Combined with Precision Sensor for Accurate Temperature.
8. Dedicated function keys enable temperature setting, making it easy to operate.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. High safety, integrated with multiple protections such as over-lift alarm, menu locking, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The muffle furnace generates heat through the heating element of silicon molybdenum rod, and the heat is evenly distributed in the furnace composed of polycrystalline mullite fibers. The microcomputer PID temperature controller receives the temperature signal in the furnace detected by the S-type Thermocouple, compares and calculates the temperature set by the user, and precisely adjusts the Heating power through the PID control algorithm, so as to realize the fast, stable and accurate control of the temperature in the furnace, and can operate at a fixed value through the timing function.
Applications
Material ashing, high temperature sintering, heat treatment, laboratory analysis
Steps
1. Connect the AC380V power supply.
2. Use the touch of five buttons to set the digital display, and set parameters such as target temperature and time.
3. Start the equipment to start heating operation.
4. After the operation, wait for the furnace body to chill down before subsequent operations.
Notice
Equipment requires an AC380V power supply.
• When opening the door, the device will automatically power off. There is a delay in repowering after closing the furnace door. Please pay attention to safety.
• The furnace surface temperature may be high, and attention should be paid to preventing burns during operation.
• Do not perform unnecessary door opening operations while the equipment is running.
The equipment is equipped with an overcurrent leakage protection switch to ensure its normal operation.
• After the operation, wait for the furnace body to fully chill down before processing the sample or cleaning.
• Please follow the instructions for parameter setting and equipment operation.
