Overview
TAISITE MFLC-16/16P ceramic muffle furnace is a high temperature heating equipment with a maximum temperature of 1600 ° C. It adopts an all-in-one lightweight and compact design. Its core adopts vacuum forming polycrystalline mullite fiber furnace and silicon molybdenum rod heating elements, combined with High Accuracy Microcomputer PID Temperature Controller and S-type Thermocouple, the temperature control accuracy can reach +/- 1 ° C, suitable for a variety of high temperature processing scenarios.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, it is conducive to the ashing process.
7. High Accuracy Microcomputer Thermostat Combined with Precision Sensor for Accurate Temperature.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. Multiple safety designs: over-lift alarm, menu lock, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The muffle furnace generates heat through the heating element of silicon molybdenum rod, and the heat is evenly distributed in the furnace composed of polycrystalline mullite fibers and effectively kept warm. The microcomputer PID temperature controller receives the temperature signal in the furnace detected by the S-type Thermocouple, and precisely adjusts the Heating power through the PID algorithm to achieve precise control of the set temperature (within the range of 300~ 1600 ° C). Users can set the temperature and program by pressing the button, and the equipment runs according to the setting.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, metal heat treatment, laboratory analysis
Steps
1. Connect the AC380V power supply.
2. Set the target temperature or program by tapping five buttons or digital display (P type: 4 Linear dispersion can be set for a total of 40 steps).
3. Start the equipment to start heating.
4. The equipment performs fixed-value operation or program operation according to the settings.
5. After the operation, wait until the temperature in the furnace drops to a safe range before opening the furnace door.
6. Turn off the power after use.
Notice
The power supply of the equipment is AC380V, and it is necessary to ensure that the power supply meets the requirements and is reliably grounded.
* The device will automatically power off when opening the door. There will be a delay in power back after closing the door. Please wait for the system to be ready.
* The furnace body is at high temperature, please use special tools during operation to avoid burns.
* Do not heat flammable, explosive or toxic gases in the furnace.
When the equipment is running, do not block the exhaust hole.
Before moving or maintaining equipment, be sure to disconnect the power supply.
Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
