Overview
TAISITE MFLC-12/16P ceramic muffle furnace is an all-in-one design laboratory high temperature equipment with a lightweight and compact structure. Operating temperatures up to 1600 ° C, Temperature range 300~ 1600 ° C, 12KW Heating power and 12L furnace volume, suitable for a variety of high temperature processing applications.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. Equipped with an exhaust device, it is conducive to the ashing process.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision S-type Thermocouple, the temperature control accuracy reaches +/- 1 ℃.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. High safety, integrated with multiple protections such as over-lift alarm, menu locking, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The muffle furnace uses microcomputer PID control technology to monitor the furnace temperature in real time through S-type Thermocouple and feed back the signal to the temperature control instrument. The instrument precisely adjusts the Power output of the silicon molybdenum rod heating element according to the setting program or fixed value to achieve precise control of the temperature in the furnace. Polycrystalline mullite fiber furnace and double shell air insulation structure effectively reduce heat loss and ensure Temperature uniformity and Stability.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Standards
The data did not mention specific compliance criteria.
Steps
Connect the AC380V 50Hz power supply.
2. Set the target temperature, program Linear dispersion or running time by tapping the five buttons or digital display setting method.
3. Start the equipment and start heating.
4. The device operates according to the set program or fixed value, and the real-time temperature can be observed through the dual-row LED digital display.
5. After the operation, after the furnace body is cooled down, the side open furnace door can be opened to take out the sample.
Notice
• The device needs to use AC380V power supply, please make sure the power supply matches.
• Please note that the furnace door is closed during operation, and the device will automatically power off when opening the door.
• Furnace body high temperature, do not touch, and note that the double shell design surface temperature may still be high.
• Do not block the exhaust hole during operation.
Equipment is equipped with an overcurrent leakage protection switch, please check its effectiveness regularly.
• When setting the program, the menu lock function can be used to prevent misoperation.
Do not exceed the maximum operating temperature of 1600 ° C.
• Device weight (gross weight 170kg) when moving or installing.
