Overview
TAISITE MFLC-12/16T ceramic muffle furnace is an all-in-one lightweight and compact laboratory high temperature equipment with a maximum Operating temperature of 1600 ° C. It is equipped with vacuum formed polycrystalline mullite fiber furnace and silicon molybdenum rod heating elements, combined with High Accuracy Microcomputer PID Control system and 7-inch color Touchscreen for precise temperature control and convenient operation.
Features
1. Integrated lightweight and compact design.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design, with the hot end away from the operator.
4. It has the safety function of opening the door and power failure, and restarting the power delay.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller combined with S-type Thermocouple, temperature control accuracy of +/- 1 ℃.
8.7 inch color Touchscreen, support finger touch light point setting.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise prevention and other functions.
10. Multiple safety designs: over-rise alarm, menu lock, over-rise prevention, door opening and power failure, restart delay, over-current and leakage protection switch.
11. Support program operation (50 steps), real-time Linear dispersion recording and U disk data export.
Principle
The muffle furnace generates heat through an internal silicon molybdenum rod heating element, which is effectively insulated and evenly distributed by the vacuum forming polycrystalline mullite fiber furnace. High Accuracy S-type Thermocouple monitors the temperature in the furnace in real time and feeds the signal back to the microcomputer PID temperature controller. The temperature controller precisely adjusts the Heating power through the PID algorithm according to the setting program or fixed value, so as to achieve fast and stable temperature control. The furnace body is designed with double shell air insulation to reduce the surface temperature.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Steps
1. Connect the AC380V power supply.
2. Set the target temperature or program Linear dispersion with a 7-inch color Touchscreen light point.
3. Start the heating, and the equipment will heat up and control the temperature according to the set program or set value.
4. During the experiment, the real-time temperature Linear dispersion can be observed through the screen.
5. After the experiment is completed, the data can be exported to the USB flash drive.
6. After the furnace body is chilled down, clean it up.
Notice
• The device needs to use AC380V power supply, please make sure the power supply matches.
• The device will automatically power off when opening the door, and there will be a delay in power back after closing the door. Please pay attention to safety.
• There may still be residual temperature on the surface of the furnace body, and protective equipment needs to be worn during operation.
• Do not make unnecessary parameter modifications or touch the heating area when the equipment is running.
• Regularly check whether the exhaust hole is unobstructed.
• Device weight (gross weight 170kg) when moving or installing.
