Overview
BOLEL PURIFICATION EQUIPMENT VS-840-U Laminar Flow Cabinet is a standard vertical circulation laminar flow single person Laminar Flow Cabinet, which is widely used in electronics, security, precision instruments, instrumentation and other fields to provide a sterile and dust-free clean environment. The quasi-closed Glass damper and double-gear adjustable air volume fan system are used to ensure stable working wind speed. The experimental area is made of 304 stainless steel integrated molding seamless connection, corrosion resistance and easy cleaning.
Features
1. Quasi-closed Glass damper, effectively prevent external airflow penetration and operation odor stimulation.
2. Two-speed adjustable air volume fan system to ensure that the working wind speed is always in a satisfactory state.
3. LED LCD panel control, allowing you to observe the wind speed of the instrument at any time.
4. Both sides of the experimental area and the countertop are seamlessly connected by 304 stainless steel integrated molding, which is resistant to corrosion and easy to clean.
5. The experimental area is equipped with an independent five-hole socket, making it convenient to use an external power supply.
6. Independent circulating air duct makes the airflow in the experimental area more efficient to achieve a dust-free state.
7. Accept customer non-standard size orders.
Principle
Adopt vertical circulation laminar flow mode, through independent circulation air duct and high-efficiency Filter, the air forms a dust-free and sterile environment in the experimental area. The two-speed adjustable fan system controls the wind speed, and the quasi-closed Glass damper isolates the external airflow to ensure that the cleanliness level reaches 100 (US LIANBANG 209E).
Applications
Electronics, security, precision instruments, meters
Steps
1. Connect the power supply and ensure that the voltage is 220V 50Hz.
2. Turn on the LED LCD panel control switch.
3. Adjust the two-speed adjustable air volume fan system as needed, and set the wind speed within the range of 0.3 to 0.6m/s.
4. Use a quasi-closed Glass damper for operation to prevent external airflow from penetrating.
5. Use the independent five-hole socket in the experimental area to connect the external equipment.
6. Turn off the power after the operation is completed.
Notice
• Power supply voltage is 220V 50HZ to avoid voltage mismatch.
• Keep the quasi-closed Glass damper closed during operation to prevent external contamination.
• Regularly clean the surface of the 304 stainless steel test area to maintain corrosion resistance and ease of cleaning.
Be careful that the noise level does not exceed 62dB (A), and check for any abnormalities promptly.
• Non-professionals should not disassemble or repair the equipment by themselves.
• When accepting non-standard size orders, it is necessary to confirm the specifications with the supplier in advance.
