Overview
MC-2000A magnetic paints thickness gauge (platings thickness gauge) is a high Accuracy measuring instrument produced by KODIN using single chip technology. It adopts magnetic thickness measurement method, which can nondestructive measurement of the thickness of nonmagnetic coatings on ferromagnetic materials. Measurement range is 0~ 1200μm, with digital display, stable indication, simple and convenient operation, single Probe full range measurement and other characteristics, and the performance reaches the professional level.
Features
1. Using single chip technology, high accuracy, digital display, stable indication.
2. Low power consumption, simple and convenient operation, no correction knob.
3. Single Probe for full scale measurement.
4. Small size and light weight (about 160g with battery).
5. With storage, readout, statistics (average, MAX Maximum, MIN Minimum), low voltage indication function.
6. Support zero point calibrating, two point calibrating and system calibrating.
7. There is a beep prompt during the operation.
8. With automatic shutdown and manual shutdown in two ways.
9. Optional micro printer and communication software for data printing and transmission.
Principle
The MC-2000A coating platings thickness gauge uses electromagnetic induction to measure the thickness of coating platings. The instrument Probe generates a closed magnetic loop on the surface of the part. When the distance between the Probe and the ferromagnetic substrate (ie, the Coating thickness) changes, the magnetoresistance of the magnetic loop and the Inductance of the Probe coil will change accordingly. By accurately measuring this change, the thickness of the coated platings can be calculated.
Applications
Machinery, Automobile, Shipbuilding, Petroleum, Chemical, Eletroplating, Spraying, Enamel, Plastic and other industries
Standards
The data did not mention specific compliance criteria.
Steps
The data does not provide detailed operation steps, but it is mentioned that the instrument has functions such as measurement, storage, deletion, reading, statistics, calibrating, printing (optional), etc., and the operation is simple and convenient.
Notice
* Measurement principle is magnetic Induction, suitable for measurement of nonmagnetic coatings on ferromagnetic materials.
* Measurement range is 0~ 1200μm, error range is +/- 3%.
* The minimum measurement surface diameter is φ 7mm, to ensure that the measured area meets the requirements.
* Suitable for workpieces with a minimum radius of curvature of 1.5mm on the convex surface and 6mm on the concave surface.
The thinnest thickness of the substrate should be ≥ 0.5mm.
* Ambient Temperature 0~ 40 ℃, relative humidity ≤ 90% RH.
* The instrument has a battery undervoltage prompt function, please pay attention to replacing the battery in time.
* Standard configuration includes standard samples for calibrating.
Optional internal corrosion probe and other accessories are available to meet special needs.
